We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal gas spring monitor wall arm with VESA plate and cable clips, folded near wall

BFKK

BFKK Gas Spring Monitor Wall Mount 13-35" 200x200mm 26.5lbs

SKU CH-3DKS-NNXV8

Gas-spring wall arm fits 13–35 inch flat or curved screens up to 26.5 lbs with VESA patterns to 200×200 mm, extends 20 inches, tilts +90°/–45°, swivels 180°, rotates 360°.

  • TypeMount
  • Fits 13 to 35 inch flat or curved screens with VESA patterns up to 200x200mm
  • Gas spring arm tested over 25000 cycles holds up to 26.5lbs securely
  • Height adjustable 11.02in and retracts to 3.39in from wall saving desk space
  • Tilt +90/-45 degrees, swivel 180 degrees, rotate 360 degrees for ergonomic viewing
  • Extends 20in forward with integrated cable management for a clutter free setup

Fits 13–35 inch flat and curved screens

This gas-spring wall arm mounts most monitors from 13 to 35 inches, covering flat and curved panels alike. A VESA extension kit pushes compatibility out to a 200 x 200 mm pattern while still supporting 75 x 75, 100 x 100, 100 x 200, 150 x 150 and 150 x 200 mm hole patterns. Steel and aluminium construction keeps the assembly rigid.

VESA 200 x 200 mm with extension kit

The mount ships with an extension plate that enables the maximum 200 x 200 mm VESA pattern, so the single specification to verify is whether your display uses that pattern or one of the smaller supported patterns. Without the kit the arm only reaches 150 x 200 mm, making the extension essential for larger screens.

Holds up to 26.5 lbs with 11.02 inch height travel

Displays weighing 26.5 lbs or less are held securely through a gas spring tested to 25,000 cycles. Height adjustment spans 11.02 inches, the arm extends 20 inches from the wall and retracts to 3.39 inches, while tilt, swivel and rotation cover +90°/-45°, 180° and 360° respectively. Heavier screens or wider VESA patterns fall outside the rated capacity.

Highlights

  • Fits 13 to 35 inch flat or curved screens with VESA patterns up to 200x200mm
  • Gas spring arm tested over 25000 cycles holds up to 26.5lbs securely
  • Height adjustable 11.02in and retracts to 3.39in from wall saving desk space
  • Tilt +90/-45 degrees, swivel 180 degrees, rotate 360 degrees for ergonomic viewing
  • Extends 20in forward with integrated cable management for a clutter free setup

Specifications

TypeMount

Questions about this item

What does the 26.5 lbs weight limit mean once the mount is on the wall?

The gas spring arm is rated to hold displays up to 26.5 lbs after 25,000 cycle tests, so a compatible monitor within that weight will stay securely positioned at any height between 3.39 and 11.02 inches from the wall.

What VESA patterns does the included extension kit support and what does that cap in practice?

The kit covers 75x75, 100x100, 100x200, 150x150, 150x200 and up to 200x200 mm patterns, so any screen with those mounting holes can be attached without extra adapters.

How much clearance and wall space does the arm need to fit and mount?

The arm retracts to 3.39 inches from the wall and extends up to 20 inches, requiring a solid wall surface for the mounting plate and enough room for the full 20-inch reach when pulled out.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.