We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BFKK

BFKK Gas Spring Monitor Arm 13-42 in 17.6 lbs 22.2 in Extend

SKU CH-BA74-25RC6

Gas-spring wall mount holds 13-42 inch screens up to 17.6 lbs with 22.2 inch reach, VESA patterns up to 200x200, and -35°/+35° tilt, 160° swivel, 360° rotation

  • TypeMount
  • Gas spring arm extends up to 22.2 inches for flexible positioning
  • Supports 13 to 42 inch screens up to 17.6 lbs for broad compatibility
  • 25,000 cycle tested spring ensures reliable height adjustment
  • VESA patterns from 75x75 to 200x200 fit most monitors
  • Concealed cable management plus two clips keep workspace tidy

Wall Mount for 13-42 Inch Screens

This gas spring arm mounts a single monitor or small TV from 13 to 42 inches on a wall. It supports VESA patterns of 75x75, 100x100, 100x200, 200x100 and 200x200 mm. The arm suits offices, kitchens and gaming setups where desk space is limited. Maximum screen weight is 17.6 lbs.

Three-Step Installation with Cable Management

Installation follows three steps: fix the wall bracket, attach the monitor to the VESA plate, then tune the gas spring tension to the screen weight. Two cable clips and a concealed channel keep wires tidy. The spring has passed 25,000 cycle tests with a low 5% damping rate for quiet, stable positioning. Walls must provide secure fixing points for the bracket weight and leverage.

22.2 Inch Reach with Full Motion

The arm extends up to 22.2 inches from the wall and folds back flush. Movement range covers -35° to +35° tilt, 160° swivel and 360° rotation for portrait or landscape orientation. It comfortably handles screens up to 42 inches and 17.6 lbs within the listed VESA patterns. Heavier displays, larger VESA hole spacing or wider screens fall outside the tested limits.

Highlights

  • Gas spring arm extends up to 22.2 inches for flexible positioning
  • Supports 13 to 42 inch screens up to 17.6 lbs for broad compatibility
  • 25,000 cycle tested spring ensures reliable height adjustment
  • VESA patterns from 75x75 to 200x200 fit most monitors
  • Concealed cable management plus two clips keep workspace tidy

Specifications

TypeMount

Questions about this item

How can I verify the arm holds its position after I mount a 13–42 in screen up to 17.6 lbs?

The gas spring is tested to 25000 cycles with a 5 % damping rate; once tension is set for the screen weight the arm should stay at any height, tilt from -35° to +35°, swivel 160° and rotate 360° without drifting.

What hardware comes in the box and what must I supply?

The bracket, VESA plate (75×75, 100×100, 100×200, 200×100, 200×200 mm), two cable clips and concealed cable routing are included; you must provide wall fixings suitable for your wall type and a screwdriver.

Which VESA pattern and extension length should I pick for my monitor?

The arm supports 75×75, 100×100, 100×200, 200×100 and 200×200 mm VESA patterns and extends up to 22.2 in; match your monitor’s VESA holes and ensure its weight is within 17.6 lbs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.