We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Foam cannon kit with 1-litre bottle, quick-connect adapter and five spray nozzles

BFKK

BFKK Foam Cannon Kit with 5 Nozzle Tips 1/4 Inch Quick Connect

SKU CH-H0TC-VR4PB

Foam cannon kit with 1 L bottle, five spray-angle nozzles and 1/4" quick-connect adapter for 1000–3000 PSI washers

  • TypePressure Washers & Accessories
  • Produces thick foam for deep cleaning with adjustable knob
  • 1 litre bottle holds enough soap for large vehicles
  • Five nozzle tips cover 0, 15, 25, 40, 65 degree patterns
  • 1/4 inch quick connect fits Ryobi, Husky, Pulsar guns
  • Handles up to 3000 PSI and 5.3 GPM flow

BFKK Foam Cannon Kit with 1/4-Inch Quick Connect

This foam cannon kit attaches to compatible pressure washer guns using a 1/4-inch quick-disconnect fitting. It includes the cannon, an adapter, and five nozzle tips for varied spray patterns. The one-litre bottle mixes soap with warm water to produce thick foam for vehicle and surface cleaning. It suits owners of Ryobi, Husky, Pulsar, Homelite, or Powerclean electric pressure washers.

Installation uses a quarter-turn adapter

Insert the adapter into the pressure washer gun and rotate clockwise until secure. Connect the cannon's 1/4-inch plug to the adapter, fill the bottle, and adjust the top knob for foam volume. A common issue is leaking at the adapter if the quarter-turn is not fully seated. The nozzle tip must also be tightened to prevent spray escaping sideways.

Rated for 1000 to 3000 PSI

The cannon operates within this pressure window, so it will not work with machines below 1000 PSI or above 3000 PSI. Flow rates exceeding 5.3 GPM may overwhelm the foam mixing chamber. The five included tips cover 0, 15, 25, 40, and 65-degree angles, but the kit cannot produce foam without a compatible pressure washer supplying pressurised water.

Highlights

  • Produces thick foam for deep cleaning with adjustable knob
  • 1 litre bottle holds enough soap for large vehicles
  • Five nozzle tips cover 0, 15, 25, 40, 65 degree patterns
  • 1/4 inch quick connect fits Ryobi, Husky, Pulsar guns
  • Handles up to 3000 PSI and 5.3 GPM flow

Specifications

TypePressure Washers & Accessories

Questions about this item

How do I verify the foam cannon is producing thick foam at the correct pressure after connecting it?

Connect the 1/4 inch plug to the gun adapter, fill the 1 litre bottle with warm water and soap, then adjust the top knob for foam volume and the nozzle for spray pattern; the unit operates between 1000 and 3000 PSI with a maximum flow of 5.3 GPM.

What components are included and is a separate pressure washer gun required?

The kit includes one pressure washer gun adapter, one foam cannon, and five nozzle tips (0, 15, 25, 40, 65 degrees); a compatible pressure washer gun is required and not included.

Which nozzle tip should I choose for washing a car versus cleaning a driveway?

Use the 25 or 40 degree tip for gentle car washing and the 0 or 15 degree tip for concentrated driveway cleaning; the 65 degree tip suits wide-area rinsing.

More in Pressure Washers

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.