BFKK
BFKK 600W 8-port USB-C GaN charger 140W PD3.1 laptop battery
Charges eight devices simultaneously with dual 140W USB-C ports, three 100W and 30W USB-C ports, and three QC 30W USB-A ports using GaN technology
- Charges MacBook Pro 16 to 55% in 30 minutes
- Powers iPhone 16 to 65% in 30 minutes
- 8 ports charge multiple devices simultaneously
- GaN Pro tech reduces heat in compact 4.3 x 2.9 x 1.5 inch design
- Includes 240W braided cable for 140W PD3.1 charging
600 W GaN charger with eight ports
The BFKK desktop charging station delivers up to 600 W from five USB-C and three USB-A outputs. Two ports reach 140 W under PD 3.1 and PPS, two more provide 100 W, one supplies 30 W and three USB-A ports offer QC 30 W each. A 240 W braided cable is included for the highest-power connection.
Best for multi-device desks, not minimal travel
Professionals running a MacBook Pro 16, iPad, phone and accessories from one socket will benefit. The brick measures 4.3 by 2.9 by 1.5 inches and includes a 1.5 m detachable mains lead for desk placement. Buyers who want a pocket-sized single-port charger or need more than two simultaneous 140 W streams should look elsewhere.
Two 140 W PD 3.1 ports decide suitability
Only the first two USB-C ports support the 140 W PD 3.1 and PPS profile that charges a MacBook Pro 16 from 0 % to 55 % in about 30 minutes. If your workflow requires two laptops at that rate at the same time, this unit fits; if you need three or more such ports, it does not.
Highlights
- Charges MacBook Pro 16 to 55% in 30 minutes
- Powers iPhone 16 to 65% in 30 minutes
- 8 ports charge multiple devices simultaneously
- GaN Pro tech reduces heat in compact 4.3 x 2.9 x 1.5 inch design
- Includes 240W braided cable for 140W PD3.1 charging
Specifications
No published specifications for this item yet.
Questions about this item
Which devices must already support PD3.1 or PPS to use the dual 140W USB-C ports at full speed?
Laptops, tablets or phones that implement PD3.1 or PPS at 140W — such as a MacBook Pro 16″ M1/M2 — will draw the full 140W from either USB-C1 or USB-C2.
Will the three USB-A ports still deliver 30W each when the two 140W USB-C ports are charging laptops?
Total output is capped at 600W; the charger intelligently distributes power, so USB-A ports share the remaining budget and may drop below 30W if both 140W ports are heavily loaded.
How can I confirm the GaN Pro charger is operating normally after plugging it in?
The unit powers on silently; connected devices show their expected charge rates — e.g. a MacBook Pro 16″ reaches ~55% in 30 min and an iPhone 16 hits ~65% in the same window — and the enclosure stays only warm, not hot.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



