We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six-way coaxial splitter, epoxy-sealed metal housing, F-type ports

BFKK

BFKK 6-Way Satellite Radio Splitter 5-2300 MHz 75Ohm

SKU CH-ZRBC-7NAM1

A 6-way coaxial splitter distributes 5-2300 MHz satellite signals to multiple receivers with epoxy-sealed corrosion protection

  • TypeRadio Home Kit
  • Connect up to six devices from one source
  • Operates across 5-2300 MHz for satellite and TV signals
  • Maintains 75 Ohm impedance for consistent signal quality
  • Uses F-type coaxial fittings for standard cable connections
  • Epoxy-sealed back cover with anti-corrosion plating for durability

Six-way splitter for multi-room satellite setups

This passive coaxial splitter divides a single satellite feed into six outputs covering the 5-2300 MHz range at 75 Ohm impedance. It is intended for installers or homeowners distributing one dish or aerial to several receivers in different rooms.

Epoxy-sealed housing with F-type connectors

The back cover uses epoxy sealing and anti-corrosion plating to protect internal contacts from moisture and oxidation. Each port accepts standard F-type plugs compatible with RG6 and RG59 coaxial cable.

Verify cable type and signal budget before ordering

Confirm that existing cabling is RG6 or RG59 and that the combined insertion loss across six ports fits the receiver sensitivity requirements. The unit provides no amplification and cannot compensate for long runs or additional splitters downstream.

Highlights

  • Connect up to six devices from one source
  • Operates across 5-2300 MHz for satellite and TV signals
  • Maintains 75 Ohm impedance for consistent signal quality
  • Uses F-type coaxial fittings for standard cable connections
  • Epoxy-sealed back cover with anti-corrosion plating for durability

Specifications

TypeRadio Home Kit

Questions about this item

Will the F-type connectors on the 6-way splitter need periodic replacement?

The epoxy-sealed back cover and anti-corrosion plating protect the F-type fittings from oxidation, so connector replacement is not expected under normal indoor use.

At what frequency does the 6-way splitter reach its upper limit during continuous operation?

The splitter is rated from 5 MHz to 2300 MHz, so 2300 MHz is the highest frequency it will pass without degradation.

Does the 6-way splitter generate noticeable heat when powering multiple receivers all day?

As a passive component with no active electronics, it produces no measurable heat and draws no power of its own.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.