BFKK
BFKK 50ft 12V LED Strip Light 6000K IP44 900 LEDs 15M
A 15 metre, 12 volt LED strip with 900 SMD 2835 LEDs delivers 6000K daylight white light and IP44 protection for indoor or outdoor decoration
- Bright daylight illumination with 900 LEDs at 6000K
- Low 12V voltage keeps the strip cool and touch-safe
- IP44 rated protection for indoor and outdoor use
- 50ft total length supplied as two 25ft reels for flexible runs
- Strong 3M adhesive backing allows quick mounting on clean surfaces
50ft 12V LED strip with 900 LEDs
The BFKK strip light measures 50ft and carries 900 SMD 2835 LEDs driven at 12V. It produces a 6000K daylight white output and is rated IP44 for splash resistance. The flexible tape suits indoor and outdoor decorative runs such as patios, balconies, kitchens or party venues.
Suits buyers wanting a long continuous run of cool
This product fits users who need a single 15M length with strong 3M adhesive backing and a supplied dimmer and power adapter. It does not suit buyers who require a higher waterproof rating than IP44, individual addressable control, or a warmer colour temperature than 6000K.
Includes dimmer and power adapter for immediate use
Two 25ft non-dimmable strips, one dimmer and one 12V power adapter are bundled so the installer can connect and adjust brightness without extra purchases. The strip can be cut every three LEDs at marked points, and the adhesive bonds after a simple alcohol wipe.
Highlights
- Bright daylight illumination with 900 LEDs at 6000K
- Low 12V voltage keeps the strip cool and touch-safe
- IP44 rated protection for indoor and outdoor use
- 50ft total length supplied as two 25ft reels for flexible runs
- Strong 3M adhesive backing allows quick mounting on clean surfaces
Specifications
No published specifications for this item yet.
Questions about this item
What power supply is required for the 12V 50ft LED strip to operate?
A 12V power adapter is required; the set includes one adapter and a dimmer, but the adapter is not built into the strip itself.
Can the 15M 2835 SMD reel be joined to an existing 12V LED run without voltage mismatch?
Yes, both reels run at 12V, so they share the same voltage; just ensure the combined current draw stays within the adapter’s rating.
How can I verify the 900 LEDs are all lit at 6000K after installation?
Power the strip and confirm a uniform daylight-white glow along the full 50ft length with no dark sections or colour variation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



