We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BFKK

BFKK 24-Port Gigabit PoE Switch 2×Uplink 400W Unmanaged 19-inch Rackmount VLAN Fanless

SKU CH-N85Q-4WXGV

A 24-port Gigabit PoE switch with two uplink ports and a 400 W built-in supply for rackmount or desktop use

  • 24 Gigabit PoE ports power WiFi6 access points and cameras
  • 400 W built-in supply delivers up to 30 W per port
  • Fanless silent operation suits noise-sensitive rack deployments
  • 2 dedicated Gigabit uplink ports connect NVRs or upstream switches
  • 4 kV lightning protection and VLAN mode secure outdoor or segmented networks

24-Port Gigabit PoE Switch

This 24-port Gigabit PoE switch provides 24 RJ45 ports at 10/100/1000 Mbps plus two uplink Gigabit ports for network expansion. It delivers up to 30W per port with a 250W total PoE budget and includes a built-in 400W power supply. The unmanaged design means plug-and-play operation without configuration, suited for installers deploying access points, IP cameras or VoIP phones.

250W Total PoE Budget

The single specification that decides suitability is the 250W total PoE power budget across all 24 ports. Each port can supply a maximum of 30W while the switch intelligently detects connected powered devices and allocates only the required wattage. If the combined draw of all attached cameras, access points or phones exceeds 250W, some devices will not receive enough power.

Fanless Silent Operation

The unit operates without fans, so it produces no audible noise in normal use. A built-in 400W power supply handles both system and PoE loads without an external adapter. 4KV lightning protection on every port helps maintain stable operation during electrical disturbances. The metal chassis provides passive heat dissipation for continuous rackmount or desktop deployment.

Highlights

  • 24 Gigabit PoE ports power WiFi6 access points and cameras
  • 400 W built-in supply delivers up to 30 W per port
  • Fanless silent operation suits noise-sensitive rack deployments
  • 2 dedicated Gigabit uplink ports connect NVRs or upstream switches
  • 4 kV lightning protection and VLAN mode secure outdoor or segmented networks

Specifications

No published specifications for this item yet.

Questions about this item

How does the 400 W power budget translate when all 24 ports are active?

The switch reserves 250 W for PoE delivery, so with every port in use each one averages about 10 W — well below the 30 W per-port ceiling.

What does the 802.3af/at label limit in everyday use?

It caps single-port output at 30 W and the total PoE draw at 250 W, so high-power devices must stay within that envelope.

What clearance does the 19-inch rackmount chassis need?

The unit fits a standard 19-inch rack and its fanless design means no extra airflow space is required above or below.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.