BFKK
BFKK 16.4ft 6000K 300 LED 700lm Dimmable Strip Light
A 16.4ft indoor LED strip with 300 diodes delivers 700lm of 6000K daylight white and dims across 10 brightness levels via a 12V supply
- Adjustable brightness with 10 dimming levels from 10 to 100%
- 300 LEDs produce 700 lumens of 6000K daylight white light
- 4ft flexible strip fits vanity mirrors, cabinets and shelving
- Strong self-adhesive backing holds the tape securely in place
- 12V low-voltage design runs cool and is safe to touch
Indoor LED Strip Lighting
This 16.4ft daylight white strip delivers 700 lumens through 300 LEDs at 6000K. The low-voltage 12V design and double-panel construction make it suitable for indoor accent lighting on vanity mirrors, under cabinets, shelves or display cases. It is non-waterproof and intended for dry indoor locations only.
Adjustable Brightness and Easy Mounting
Ten brightness levels from 10 to 100 percent are selected by pressing and holding the control button. Thick self-adhesive backing holds the flexible tape securely to clean surfaces without additional fixings. The 12V power supply keeps the strip cool and safe to touch during normal operation.
Consistent Output Over Extended Use
The low-voltage architecture and double-panel structure maintain stable light output without overheating during sustained operation. Brightness remains steady across all ten dimming steps for the duration of each session. The strip is not designed for outdoor or wet environments.
Highlights
- Adjustable brightness with 10 dimming levels from 10 to 100%
- 300 LEDs produce 700 lumens of 6000K daylight white light
- 4ft flexible strip fits vanity mirrors, cabinets and shelving
- Strong self-adhesive backing holds the tape securely in place
- 12V low-voltage design runs cool and is safe to touch
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 16.4ft LED strip using the self-adhesive backing, and what step is often missed?
Clean the mounting surface thoroughly, let it dry completely, then press the strip firmly along its full length; skipping the surface-preparation step causes the adhesive to fail over time.
What maintenance will the 12V 300-LED strip need as it ages?
No scheduled maintenance is required; if brightness drops, check the 12V power supply connections and replace the supply if its output has drifted below 12V.
What limit appears first when the 700-lumen strip runs continuously at the 100% dimmer setting?
The 12V power supply’s thermal protection typically trips first, shutting off the strip until the supply cools down.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



