BFKK
BFKK 10T Hydraulic Crimping Tool 12-2/0 AWG 0.43 inch Stroke 9 Die Sets 180° Rotation
Crimps 12 to 2/0 AWG cables with 10-ton force, 0.43 inch stroke and nine die sets that rotate 180 degrees
- Delivers 10-ton force for secure hexagonal crimps
- Handles 12 to 2/0 AWG and 1/8 inch stainless rope
- 43 inch stroke resets fast via oil-return valve
- Nine die pairs swap quickly with one-way latch
- Rotates 180 degrees for tight-space access
Hydraulic Crimping Tool 10T
This 10-ton hydraulic crimping tool is built for electricians and technicians who terminate battery and welding cables. It delivers hexagonal confining pressure through nine die sets covering 12 to 2/0 AWG plus 1/8 inch stainless steel wire rope. The forged #45 steel frame is designed for long service life.
Capacity and Headroom 12-2/0 AWG
The tool handles cables from 12 AWG up to 2/0 AWG with a 0.43 inch stroke that completes each crimp in one cycle. It does not reach larger gauges such as 3/0 or 4/0 AWG, so installers working on heavy feeder cables will need a larger press. The nine included dies cover the stated range without gaps.
Upgrade from Manual Crimpers
Users moving up from hand-operated crimpers gain consistent hex crimps and reduced hand fatigue on repetitive jobs. The 180-degree rotating head allows access in tight panels where straight tools cannot reach. The jump is worthwhile when daily crimp volume makes manual tools slow or unreliable.
Highlights
- Delivers 10-ton force for secure hexagonal crimps
- Handles 12 to 2/0 AWG and 1/8 inch stainless rope
- 43 inch stroke resets fast via oil-return valve
- Nine die pairs swap quickly with one-way latch
- Rotates 180 degrees for tight-space access
Specifications
No published specifications for this item yet.
Questions about this item
Will the 10T hydraulic crimper handle the same 12-2/0 AWG battery cables I currently crimp with a manual tool?
Yes, the 10T hydraulic crimper covers the full 12-2/0 AWG range including 12, 10, 8, 6, 4, 2, 1/0 and 2/0 AWG, so it works with the same battery cables you already use.
How can I confirm the 0.43 inch stroke is delivering proper hexagonal confining pressure after setup?
After crimping, inspect the terminal for a uniform hexagonal imprint from the die set; the oil return valve should reset the piston quickly, indicating full stroke completion and correct pressure.
Does the box include all 9 die sets for 12-2/0 AWG or must I buy any separately?
The tool ships with 9 pairs of hexagon crimping dies covering 12, 10, 8, 6, 4, 2, 1/0, 2/0 AWG and 1/8 inch stainless steel wire rope, so no additional dies are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
