Bessey Tools
Bessey Tools Cross Over Clamp Antivibe 12 in Ergo
A 12-inch bar clamp delivers 100 lb clamping force with an ergonomic grip and weighs 4.15 units
- TypeClamps
- MaterialHAWA
- Weight4.15
- 12 in clamping capacity for wide workpieces
- 100 lb clamping force holds heavy parts securely
- 5 1/2 in throat depth reaches past edges
- Ergonomic grip reduces hand fatigue
- 15 lb weight keeps the clamp manageable
12-Inch Cross Over Clamp with Antivibe Grip
This Bessey bar clamp delivers a 12 in clamping capacity and 100 lb of clamping force for industrial holding tasks. The 5 1/2 in throat depth reaches past workpiece edges while the standard jaw pads distribute pressure evenly. A steel bar and sliding mechanism provide rigid alignment during glue-ups or assembly. The ergonomic grip reduces hand vibration during repeated tightening.
Check workpiece thickness
Verify that the material thickness fits within the 12 in maximum opening and that the 5 1/2 in throat depth reaches your clamping point. The 1 1/2 in jaw pad width suits flat or slightly curved surfaces. Ensure the 3/4 in spindle diameter matches any existing hardware or accessories you plan to use. The 4 in handle length requires adequate swing space around the joint.
Steel bar construction
The steel bar resists flex under the rated 100 lb force, keeping jaws parallel across the full 12 in span. Standard jaw pads protect finished surfaces without marring. The sliding bar mechanism locks securely yet releases quickly for repositioning. The ergonomic grip absorbs vibration, reducing fatigue during extended clamping sessions in the workshop.
Highlights
- 12 in clamping capacity for wide workpieces
- 100 lb clamping force holds heavy parts securely
- 5 1/2 in throat depth reaches past edges
- Ergonomic grip reduces hand fatigue
- 15 lb weight keeps the clamp manageable
Specifications
| Brand | BESSEY |
|---|---|
| Type | Clamps |
| Material | HAWA |
| Weight | 4.15 |
Questions about this item
What comes with the Bessey Cross Over Clamp Antivibe 12 in Ergo and is anything extra needed?
The clamp ships complete with its steel bar, sliding mechanism, spindle and ergonomic grip fitted. No additional parts are required to start clamping.
Which capacity should I choose if I need a 12 in reach and strong holding power?
This model provides a 12 in clamping capacity and delivers 100 lb of clamping force, matching the stated specification.
How does the 100 lb clamping force perform when the clamp is mounted on a real workpiece?
The 100 lb force is generated by the steel spindle and transmitted through the standard jaw pads, giving a firm hold across the 12 in capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
