BESIGN
BESIGN 200 W Projector Lamp 5J.JHN05.001 for BenQ HT2550 TK800 W1700 W1720 2 in 1 accessory
200 W replacement lamp with housing fits BenQ HT2550, TK800, W1700 and W1720 projectors and lasts 4000 to 6000 hours
- 200 W lamp powers compatible BenQ projectors
- 4000 to 6000 hour average life reduces replacement frequency
- Pre-installed housing enables tool-free installation in minutes
- Fits HT2550 TK800 W1700 W1720 and related models
- 180 day guarantee covers refund or exchange
Replacement Lamp for BenQ Projectors
The BESIGN 5J.JHN05.001 module fits BenQ HT2550, TK800, TK800M, W1700, W1700S, HT2550M and W1720 projectors. It ships as a complete lamp-with-housing unit ready for user installation. The 200 W rated lamp uses a genuine bulb sourced from the manufacturer's own factory. Buyers needing a different part number or a bare bulb without housing cannot use this item.
Thermal and Power Characteristics
The lamp operates at 200 watts while the manufacturer highlights cite a 240 watt power specification for the light source. Average service life is rated between 4000 and 6000 hours under normal use. No fan-noise or thermal-throttling data is provided for the host projectors. Installers should allow the projector to cool fully before starting the swap.
Bundled Housing and Guarantee
The unit includes the bulb pre-mounted in its housing so no separate cage assembly is required. Installation follows a five-step process: unplug the projector, remove the cover panel, unplug the old module, seat the new module, then refit the panel and screw. An 180-day satisfaction guarantee covers refund or exchange if the lamp does not meet expectations.
Highlights
- 200 W lamp powers compatible BenQ projectors
- 4000 to 6000 hour average life reduces replacement frequency
- Pre-installed housing enables tool-free installation in minutes
- Fits HT2550 TK800 W1700 W1720 and related models
- 180 day guarantee covers refund or exchange
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 5J.JHN05.001 lamp with housing, and which step do people often skip?
Unplug the projector, remove the cover screw and panel, unplug the old module, insert the new lamp securely, then refit the panel and tighten the screw; the step most often missed is ensuring the new lamp clicks firmly into the connector before closing the cover.
What maintenance or replacement will the 200 W lamp need after its rated life?
The lamp is rated for 4000 to 6000 hours; once brightness drops noticeably, replace the entire lamp-with-housing module — no separate filter or bulb-only change is required.
What limit appears first during long sessions with the 240 W power draw?
Sustained use pushes the lamp toward its 4000–6000 hour lifespan; thermal protection will dim or shut down the projector if internal temperatures exceed safe limits before the lamp reaches its rated hours.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
