We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Aluminium video tripod with fluid head and mid-level spreader, three-section legs, rubber and spiked feet

Benro

Benro BV6 PRO 13.2 lb Aluminium Video Tripod with BV6 Head Mid Spreader

SKU CH-D73E-BZFXA

Aluminium video tripod with BV6 fluid head, 8-step counterbalance and 4-step drag for smooth 360° panning, supporting 13.2 lb payloads from 31.7 to 63 inches with a 75 mm bowl and mid-level spreader

  • Supports heavy rigs with 13.2 lb load capacity
  • Smooth cinematic moves via 8-step counterbalance and 4-step drag
  • Stable on any surface with 75 mm bowl and mid spreader
  • Height flexibility from 31.7 to 63.0 inches
  • Portable aluminium kit at 13.2 lbs with carry case

Professional Video Tripod Kit

The Benro BV6 PRO combines a three-section aluminium tripod with a BV6 fluid video head and mid-level spreader for studio and location filming. It supports camera rigs up to 13.2 lbs and adjusts from 31.7 to 63 inches in height. The 75 mm bowl and dual spiked rubber feet provide a stable base on varied surfaces.

Thermals Noise and Power

This mechanical tripod system has no electronic components, so it produces no heat, fan noise or electrical power draw during operation. Smoothness comes from the fluid head’s 4-step pan and tilt drag and 8-step counterbalance (steps 0-7) rather than motors. All controls sit on the left side for single-hand adjustment while shooting.

Counterbalance Steps Decide Fit

The 8-step counterbalance range (steps 0-7) is the single specification that determines whether the head can balance your specific camera and lens combination. If your rig falls outside this counterbalance window, the head will not hold position smoothly. Check your total payload weight and balance point against these steps before buying.

Highlights

  • Supports heavy rigs with 13.2 lb load capacity
  • Smooth cinematic moves via 8-step counterbalance and 4-step drag
  • Stable on any surface with 75 mm bowl and mid spreader
  • Height flexibility from 31.7 to 63.0 inches
  • Portable aluminium kit at 13.2 lbs with carry case

Specifications

No published specifications for this item yet.

Questions about this item

How do I mount the BV6 head onto the 75 mm bowl and what is the step users often miss?

Seat the head into the 75 mm bowl, tighten the bowl clamp fully, then engage the mid-level spreader locks — skipping the spreader step leaves the legs free to splay.

Which parts of the BV6 fluid head will need service or replacement after extended use?

The fluid cartridges inside the pan and tilt axes, the counterbalance spring mechanism, and the quick-release plate latch are the wear items that typically require service or replacement.

What is the first limit reached when panning continuously at the 360° setting under a full 13.2 lb load?

The 4-step pan drag will reach its maximum resistance setting first, limiting how smoothly the head can sustain a constant-speed pan with a 13.2 lb payload.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.