BELL AND GOSSETT
BELL AND GOSSETT FT125H-4 406F Cast Iron Steam Trap 125 psi 190 lb/hr HVAC Control
Cast iron steam trap with integrated air vent and strainer handles 190 lb/hr condensate at 125 psi for horizontal process equipment, heat exchangers and steam mains
- Handles 190 lb/hr condensate at 125 psi
- Float and thermostatic design ensures continuous discharge
- Cast iron body resists corrosion in steam systems
- Integrated air vent removes non-condensable gases automatically
- Built-in strainer protects trap from pipeline debris
Steam trap for process equipment and unit heaters
This cast-iron float-and-thermostatic trap handles condensate loads up to 190 lb/hr at 125 psi. It is suited to process equipment, blast coils, heat exchangers, steam mains and unit heaters that require continuous drainage with an integral air vent.
Check pressure, orientation and piping layout
Verify that the system operates at or below 125 psi and that the trap can be installed horizontally. Confirm the 5 1/2 in centre-to-centre spacing matches the existing pipework and that the H-pattern four-port configuration suits the connection scheme.
Cast-iron body with built-in strainer and air vent
The cast-iron body and float resist corrosion in steam service. An integral strainer protects the valve seat from debris, while the included air vent speeds start-up by removing non-condensable gases without extra fittings.
Highlights
- Handles 190 lb/hr condensate at 125 psi
- Float and thermostatic design ensures continuous discharge
- Cast iron body resists corrosion in steam systems
- Integrated air vent removes non-condensable gases automatically
- Built-in strainer protects trap from pipeline debris
Specifications
| Brand | BELL & GOSSETT |
|---|
Questions about this item
Does the trap ship with its air vent and strainer, or must they be ordered separately?
The unit includes both an air vent and a strainer, so no extra parts are required for standard installation.
The listing shows 190 lb/hr at 125 psi — is that the only capacity option?
The published data lists a single condensate capacity of 190 lb/hr at the maximum 125 psi working pressure.
How much condensate will the trap actually pass at the rated 125 psi in a live steam main?
At the full 125 psi inlet pressure the trap is rated to discharge 190 lb/hr of condensate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
