BELL AND GOSSETT
BELL AND GOSSETT 17C-V-2-25 Steam Trap 25 psi 353F 4-23/32 In L hvac control
Removes condensate from steam systems up to 25 psi and 353F with a 162 lb/hr capacity and integrated air vent
- Reliable condensate removal up to 162 lb/hr for efficient steam systems
- Rated for 25 psi and 353F operation in demanding HVAC applications
- Brass body construction resists corrosion for long service life
- Straight-thru configuration with 4-23/32 in spacing simplifies vertical installation
- Built-in air vent eliminates separate venting components for faster setup
Steam trap for convectors and heating coils
This Bell & Gossett 17C series steam trap suits convectors, steam kettles, evaporators, heating coils, radiators, sterilizers, steam tracing and unit heaters. It handles condensate loads up to 162 lb/hr in vertical installations.
25 psi operating pressure limit
The trap is rated for a maximum working pressure of 25 psi and a temperature limit of 353 °F. Selecting a trap with a lower pressure rating would cause premature failure in this application.
Straight-through NPT connections simplify piping
The body uses 1/2 inch female NPT inlet and outlet ports spaced 4-23/32 inches apart in a straight-through configuration. An integrated air vent is included, so no separate vent fitting is required during installation.
Highlights
- Reliable condensate removal up to 162 lb/hr for efficient steam systems
- Rated for 25 psi and 353F operation in demanding HVAC applications
- Brass body construction resists corrosion for long service life
- Straight-thru configuration with 4-23/32 in spacing simplifies vertical installation
- Built-in air vent eliminates separate venting components for faster setup
Specifications
| Brand | BELL & GOSSETT |
|---|
Questions about this item
What does the 162 lb/hr condensate capacity mean for a real installation?
It indicates the maximum steam condensate the trap can discharge per hour at 25 psi, suitable for convectors, kettles, coils and similar equipment.
How does the 1/2 in NPT female inlet limit the piping options?
The trap accepts only 1/2 in male NPT threads, so any supply line must match that size and thread standard directly.
What clearance is needed to fit the 4-23/32 in body in a vertical line?
The straight-through brass body measures 4-23/32 inches between ports and must be mounted vertically, so allow at least that length plus fitting engagement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
