We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver lithium-ion battery block for IntelliVue monitors

Beisite

Beisite M4605A 65Wh 10.8V IntelliVue Monitor Battery

SKU CH-3AWD-J07M2

Lithium-ion 10.8 V 65 Wh battery powers Philips MP20, MP30, MP40, MP50 and MP60 IntelliVue monitors

  • ColorSilver
  • TypeBattery
  • CompatibilityFor MP20 MP30 MP40 MP50 MP60 IntelliVue Monitor Battery
  • Battery TypeLithium-Ion
  • Battery Voltage10.8V
  • Battery Capacity65Wh
  • 65Wh capacity powers IntelliVue monitors through long shifts
  • 8V lithium-ion chemistry matches original M4605A specifications
  • Replaces part numbers M4605A and 31CR19/65-3 directly
  • Compatible with MP20, MP30, MP40, MP50 and MP60 models
  • New genuine battery supplied as single unit in package

Direct replacement for IntelliVue monitors

This lithium-ion battery replaces part numbers M4605A and 31CR19/65-3 in Philips MP20 MP30 MP40 MP50 MP60 IntelliVue monitors. It restores portable power for clinical environments where continuous monitoring is required. Facilities maintaining these specific monitor models can deploy the pack without adapter cables or firmware updates. Buyers needing batteries for other monitor families or higher capacity cells will not be served by this SKU.

Thermal behaviour and power profile

The 10.8V 65Wh lithium-ion chemistry delivers stable voltage across the discharge curve used by IntelliVue patient monitors. Normal operation in clinical settings produces minimal heat and no audible noise because the pack has no moving parts. Power draw follows the monitor's own load profile rather than imposing a fixed ceiling. Technicians who require detailed thermal logs or maximum current ratings will not find those figures in this listing.

Single-unit package with no extras

The box contains one battery and no charging dock, calibration software or mounting hardware. Installation is a direct swap into the monitor's existing battery compartment using the original latch mechanism. No driver installation or configuration utility is supplied or required. Teams expecting a multi-pack bundle, external charger or diagnostic tool will need to source those separately.

Highlights

  • 65Wh capacity powers IntelliVue monitors through long shifts
  • 8V lithium-ion chemistry matches original M4605A specifications
  • Replaces part numbers M4605A and 31CR19/65-3 directly
  • Compatible with MP20, MP30, MP40, MP50 and MP60 models
  • New genuine battery supplied as single unit in package

Specifications

BrandM4605A
ModelM4605A
Part Number31CR19/65-3
ColorSilver
TypeBattery
CompatibilityFor MP20 MP30 MP40 MP50 MP60 IntelliVue Monitor Battery
Battery TypeLithium-Ion
Battery Voltage10.8V
Battery Capacity65Wh

Questions about this item

How is the 10.8V 65Wh battery installed in the IntelliVue monitor, and what step is often missed?

Power off the monitor, open the battery compartment, align the M4605A pack with the guide rails, press firmly until the latch clicks, then run the on-screen battery calibration before first use.

What maintenance or replacement will the M4605A lithium-ion pack need later?

Expect gradual capacity loss after several hundred charge cycles; replace the pack when runtime no longer covers a full shift or the monitor flags a battery-health warning.

What limit appears first during sustained use of this 65Wh battery?

The 65 watt-hour capacity sets the runtime ceiling; under continuous monitoring load the pack will deplete before any thermal or voltage limit is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.