Beckett
Beckett M400AS-M430AS 430 GPH Auto Shut-Off Fountain Pump
A 430 GPH submersible fountain pump with an automatic low-water shut-off sensor, adjustable flow valve and 16-foot cord
- TypePool, Pond & Fountain Pumps
- ColorTransparent
- Auto shut-off sensor protects pump from dry-run damage
- 430 GPH maximum flow powers large fountains and small ponds
- Adjustable valve lets you control water flow rate
- 8 ft maximum lift handles elevated fountain installations
- UL listed for safety with 16 ft cord and 33 watt efficiency
430 GPH Auto Shut-Off Fountain Pump
The Beckett M400AS-M430AS is a submersible pump rated at 430 gallons per hour with a maximum lift of 8 ft. It delivers 400 GPH at a height of 1 ft. A built-in sensor detects low water levels and automatically shuts off the pump to preserve its life. The unit operates on 120V, 60Hz power and draws 33 watts.
Suited for large fountains and small ponds
This pump is designed for most large indoor and outdoor fountains and for small ponds. It also serves fish tanks, hydroponics, aquaponics, statuary and aquariums. Buyers who need a higher flow rate or greater lift than the stated 430 GPH and 8 ft. should look at other models. The transparent colour and 16 ft. cord length suit installations where the power source is within that distance.
Check tubing and voltage before ordering
The pump connects to 1/2" ID tubing using the included adapters. Verify that your fountain or pond plumbing matches this tubing size. Confirm the installation site provides a 120V, 60Hz electrical supply and that the 16 ft. cord reaches a suitable outlet. The product carries a California Proposition 65 warning for chemicals known to cause cancer and reproductive harm.
Highlights
- Auto shut-off sensor protects pump from dry-run damage
- 430 GPH maximum flow powers large fountains and small ponds
- Adjustable valve lets you control water flow rate
- 8 ft maximum lift handles elevated fountain installations
- UL listed for safety with 16 ft cord and 33 watt efficiency
Specifications
| Brand | BECKETT |
|---|---|
| Type | Pool, Pond & Fountain Pumps |
| Color | Transparent |
Questions about this item
What tubing size do I need to connect the 1/2" ID outlet on this pump?
Use 1/2" inner-diameter tubing; the box includes adapters for that size.
Will the auto shut-off still protect the motor if I run the pump at the 400 GPH / 1 ft setting instead of the 430 GPH maximum?
Yes, the low-water sensor works at any flow setting the adjustable valve allows.
How can I verify the shut-off sensor is functioning after I install the pump?
Lower the water until the sensor is exposed; the pump should stop within seconds.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
