Beckett
Beckett FR800-FR900 900 GPH Submersible Pond Pump Kit
Submersible pump kit moves up to 900 GPH for large ponds up to 1,800 gallons and includes foam filter, three fountain heads, adapters and extension tubes
- TypePool, Pond & Fountain Pumps
- ColorTransparent
- Pumps up to 900 GPH for large ponds up to 1,800 gallons
- 9 ft maximum lift handles elevated water features
- Oil-free design keeps fish and plants safe
- Three fountain heads create waterbell, tiered spray or bubbler effects
- 15 ft cord and 3/8", 1/2", 3/4" tubing adapters simplify setup
Submersible Pond Pump Kit
The Beckett FR800-FR900 kit delivers a complete submersible pumping solution for ponds and water features. It moves up to 900 gallons per hour and suits large ponds up to 1,800 gallons. The oil-free design keeps fish and plants safe. A 15-foot cord provides flexible placement.
Upgrade from smaller pumps
This kit replaces lower-capacity pumps when a pond exceeds their flow or lift capability. It supplies 800 GPH at one foot of height and reaches a maximum lift of 12.9 feet. The jump is worth it when a single unit must handle filtration and a decorative fountain simultaneously. Three included nozzles let you change the water pattern without extra parts.
Check tubing and power before ordering
Verify that your existing tubing uses 3/8, 1/2, or 3/4 inch inner diameter to match the supplied adapters. Confirm a 120-volt, 60-hertz outlet is available near the pond for the 70-watt motor. The pump is UL listed for electrical safety. Ensure the foam filter can be accessed for routine cleaning.
Highlights
- Pumps up to 900 GPH for large ponds up to 1,800 gallons
- 9 ft maximum lift handles elevated water features
- Oil-free design keeps fish and plants safe
- Three fountain heads create waterbell, tiered spray or bubbler effects
- 15 ft cord and 3/8", 1/2", 3/4" tubing adapters simplify setup
Specifications
| Brand | BECKETT |
|---|---|
| Type | Pool, Pond & Fountain Pumps |
| Color | Transparent |
Questions about this item
What tubing sizes does the 900 GPH pump accept?
The pump fits 3/8", 1/2", or 3/4" ID tubing for flexible plumbing options.
How do I install the fountain heads and what is the common mistake?
Attach the chosen nozzle to the adapter and extension tube, then secure to the pump outlet; the step often missed is tightening the adapter fully to prevent leaks.
When should the foam filter be cleaned or replaced?
Rinse the foam filter whenever flow noticeably drops, typically every few weeks during heavy use, and replace it if it tears or no longer traps debris.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
