We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, 12 inch length, threaded male ends, silver-grey finish

Beck C. H.

Beck C. H. 3/4" MNPT x 12" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-MZ0R-5AGTR

3/4 inch Schedule 40 galvanised steel pipe nipple with male NPT threads, 12 inches long, rated for 150 psi at 150 °F

  • MaterialHAWA
  • Galvanized coating resists corrosion in wet environments
  • Schedule 40 wall handles 150 psi at 150 °F
  • Male NPT threads connect directly to female fittings
  • Continuous weld construction prevents leaks under pressure
  • Made in USA from Grade A steel

3/4" Galvanized Steel Pipe Nipple

This 12-inch Schedule 40 nipple connects air, gas, oil, steam or water lines. It features male NPT threads on one end and a threaded beveled end on the other. The fitting is made in the USA from Grade A welded steel with a galvanized coating.

Who Should Use This

Plumbers and maintenance technicians needing a 150 psi rated nipple for standard pressure piping will find this part suitable. It is not for installers who require a different nominal diameter or a higher pressure class than Schedule 40 provides.

Critical Specification

The 3/4 inch nominal pipe size determines compatibility with existing fittings and the 53/64 inch inside diameter governs flow capacity. Verify both dimensions match your system requirements before ordering.

Highlights

  • Galvanized coating resists corrosion in wet environments
  • Schedule 40 wall handles 150 psi at 150 °F
  • Male NPT threads connect directly to female fittings
  • Continuous weld construction prevents leaks under pressure
  • Made in USA from Grade A steel

Specifications

MaterialHAWA
BrandBECK

Questions about this item

What thread size must the mating fitting have to connect to the 3/4" MNPT end of this nipple?

The nipple has a 3/4 inch male NPT thread, so the mating fitting must be a 3/4 inch female NPT thread.

Will the Schedule 40 wall of this nipple match the wall thickness of my existing Schedule 40 galvanized piping?

Yes, this nipple is Schedule 40, so its wall thickness matches standard Schedule 40 galvanized pipe of the same nominal size.

How can I verify the nipple is rated for the 150 psi @ 150 °F service I need?

The nipple is marked with a maximum operating pressure of 150 psi at 150 degrees F, confirming it meets that rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.