We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple, threaded both ends, 4.5 inch length

Beck C. H.

Beck C. H. 2" MNPT x 4-1/2" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-CP7B-GJSPR

Threaded both ends, Schedule 40 galvanized steel nipple rated 150 psi at 150 °F

  • Galvanized steel resists corrosion for long service life
  • Schedule 40 wall thickness of .154 in handles 150 psi at 150 °F
  • Continuous weld construction eliminates leak paths
  • MNPT threads on both ends fit standard 2 in fittings
  • Meets ASTM A-53 Type F and ASTM A733 Grade A standards

Galvanized steel pipe nipple for 2-inch systems

This Schedule 40 nipple is made from continuously welded galvanized steel and meets ASTM A-53 Type F and ASTM A733 Grade A standards. It is designed for threaded pipe connections in plumbing and industrial installations. The 4.5-inch overall length provides a short, rigid link between two female-threaded components.

2.062-inch inside diameter

The bore measures 2.062 inches, allowing full flow for two-inch nominal piping. Rated at 150 psi at 150 degrees Fahrenheit, it handles typical water, air and oil lines within that pressure and temperature envelope. Systems requiring higher pressures or larger flow areas will need a heavier schedule or larger nominal size.

Threaded both ends with 2.375-inch outside diameter

Each end carries a 2-inch MNPT thread for direct engagement with standard female fittings. The 0.154-inch wall thickness and 2.375-inch outer diameter match Schedule 40 dimensions, ensuring compatibility with common pipe clamps, hangers and wrenches. The galvanized coating resists corrosion in damp environments, while the metal-detectable construction aids quality control in food or pharmaceutical lines.

Highlights

  • Galvanized steel resists corrosion for long service life
  • Schedule 40 wall thickness of .154 in handles 150 psi at 150 °F
  • Continuous weld construction eliminates leak paths
  • MNPT threads on both ends fit standard 2 in fittings
  • Meets ASTM A-53 Type F and ASTM A733 Grade A standards

Specifications

BrandBECK

Questions about this item

Will the 2.375 in outside diameter of this nipple match my existing 2 in schedule 40 galvanized fittings?

Yes, the 2.375 in outside diameter and 2 in nominal size are standard for schedule 40 pipe, so it threads directly into matching 2 in MNPT fittings.

How can I confirm the nipple is rated for my 150 psi steam line at 150 °F after installation?

The nipple is marked to ASTM A-53 Type F and ASTM A733 Grade A with a maximum pressure of 150 psi at 150 °F, so a visual check of the markings verifies the rating.

Does the box include thread sealant or gaskets for the 2 in MNPT ends?

The nipple ships alone with continuous-weld galvanized steel construction; thread sealant or gaskets must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.