We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
12-inch galvanized steel pipe nipple with male NPT threads

Beck C. H.

Beck C. H. 1" MNPT x 12" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-6Y7N-CRSRZ

Connects air, gas, oil, steam or water lines with 12-inch Schedule 40 galvanized steel rated to 150 psi

  • MaterialHAWA
  • Galvanized coating resists corrosion for long service life
  • Schedule 40 wall handles 150 psi at 150 °F
  • 12 inch length with male NPT threads fits standard fittings
  • Continuous weld construction ensures leak-free performance
  • Made in USA from Grade A steel for reliable quality

1" MNPT Schedule 40 Pipe Nipple

This galvanized steel nipple connects threaded pipe runs in air, gas, oil, steam or water systems. The 12-inch overall length and male NPT threads suit Schedule 40 fittings. It is made in the USA from Grade A steel with a continuous weld.

150 psi at 150 °F pressure rating

The maximum operating pressure of 150 psi at 150 degrees Fahrenheit determines whether this nipple meets the system design limits. Verify the service conditions before installation to ensure safe operation.

Galvanized coating and welded construction

The galvanized finish protects the steel against corrosion in wet or humid environments. The continuous welded seam and threaded male NPT end provide a leak-resistant joint without extra sealant or gaskets.

Highlights

  • Galvanized coating resists corrosion for long service life
  • Schedule 40 wall handles 150 psi at 150 °F
  • 12 inch length with male NPT threads fits standard fittings
  • Continuous weld construction ensures leak-free performance
  • Made in USA from Grade A steel for reliable quality

Specifications

MaterialHAWA
BrandBECK

Questions about this item

What does the 150 psi rating mean once the nipple is installed in a real system?

The nipple is rated for 150 psi at 150 °F, so it will hold that pressure for air, gas, oil, steam or water at that temperature.

What does the 1" NPT thread cap in practice?

The 1" male NPT thread mates with any 1" female NPT fitting and is limited to the Schedule 40 pressure class.

What clearance does the 12" overall length and 1 5/16" outside diameter need to fit?

The nipple needs a straight run of at least 12 inches and a hole or bracket that accepts a 1 5/16 inch outside diameter.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.