We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized steel pipe nipple with threaded ends, 8 inch length

Beck C. H.

Beck C. H. 1-1/2" MNPT x 8" TBE Galvanized Steel Pipe Nipple Sch 40

SKU CH-S3DE-KTNDH

Galvanized steel pipe nipple with 1-1/2 inch MNPT threads, Schedule 40 rating and 150 psi pressure capacity for air, gas, oil, steam and water

  • MaterialHAWA
  • Galvanized coating resists corrosion for long service life
  • Schedule 40 wall handles 150 psi at 150 °F
  • Continuous weld construction ensures leak-free joints
  • Male NPT threads connect directly to standard fittings
  • Made in USA from Grade A steel for reliable quality

Galvanised Steel Pipe Nipple Schedule 40

This Beck nipple connects 1 1/2 inch male NPT threads for air, gas, oil, steam or water lines. The continuous-weld construction uses Grade A steel made in the USA and carries a galvanised coating for corrosion resistance. It is suited to installers who need a reliable threaded joint in Schedule 40 piping systems.

150 psi maximum operating pressure at 150 °F

The single figure that decides fit is the 150 psi rating at 150 degrees Fahrenheit, matching Schedule 40 service conditions. If your system runs above this pressure or temperature the nipple is not the correct part. Buyers who need higher pressure ratings must select a different schedule or material.

Welded steel holds shape under steady pressure

The continuous-weld seam maintains integrity during sustained loads rather than brief spikes. Galvanised finish resists internal scaling when water or steam circulates continuously. Threaded male ends stay tight through thermal cycles without the relaxation seen in compression fittings.

Highlights

  • Galvanized coating resists corrosion for long service life
  • Schedule 40 wall handles 150 psi at 150 °F
  • Continuous weld construction ensures leak-free joints
  • Male NPT threads connect directly to standard fittings
  • Made in USA from Grade A steel for reliable quality

Specifications

MaterialHAWA
BrandBECK

Questions about this item

What does the 150 psi rating mean when the nipple is installed in a real piping system?

The nipple is rated for a maximum operating pressure of 150 psi at temperatures up to 150 degrees Fahrenheit for air, gas, oil, steam or water service.

How does the 1-1/2 inch MNPT thread standard affect what fittings can be used?

The male National Pipe Thread connection follows Schedule 40 dimensions, so it mates with standard female NPT fittings of the same nominal size and schedule.

What clearance is needed to fit the 8 inch overall length and 1 29/32 inch outside diameter?

The nipple measures 8 inches long with an outside diameter of 1 29/32 inches, requiring at least that much straight run and hole clearance for installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.