BatteryJack inc.
BatteryJack inc. Banshee PS-625 AGM 12V 19Ah 220CCA standard battery
12 V 19 Ah AGM battery with 220 CCA and nut-and-bolt terminals, sized 6.97 by 3.98 by 6.18 inches, fits Yuasa YB16CL-B and many other powersport part numbers
- Battery Pack1-pack
- AGM chemistry means zero maintenance and no acid spills
- 19 Ah capacity delivers long run-time between charges
- 220 CCA gives strong cold-weather starting power
- Fits Yuasa YB16CL-B, YTX19L-BS and many other part numbers
- Compact 6.97 x 3.98 x 6.18 inch case suits tight battery boxes
Direct replacement AGM battery
The Banshee PS-625 is a 12 V 19 Ah sealed AGM battery rated at 220 CCA. It fits motorcycles, ATVs, personal watercraft and UTVs that require a 12 V 19 Ah power source. The maintenance-free design uses absorbed glass mat chemistry and nut-and-bolt terminals. It weighs 14.19 lbs (6.44 kg) and measures 6.97" x 3.98" x 6.18".
Replaces Yuasa YB16CL-B and cross-references
This unit replaces Yuasa YB16CL-B, YTX19L-BS, YT19BL-BS, PC625, PS625, CTX19L-BS, CB16CL-B, AB16CLB, YUAM2S6CL, UT16CL, UB16CL-B and ATX16CLBBS. The upgrade is worthwhile when the original battery no longer holds a charge or delivers the listed cold-cranking amps. It is not for applications that demand a different voltage, capacity or terminal layout.
Check dimensions and terminal orientation
Verify that the 6.97" length, 3.98" width and 6.18" height fit your battery tray and that the nut-and-bolt terminals match the cable routing. Confirm the vehicle calls for a 12 V 19 Ah AGM battery at the 10-hour rate. Buyers who need a different capacity, terminal type or chemistry cannot use this model.
Highlights
- AGM chemistry means zero maintenance and no acid spills
- 19 Ah capacity delivers long run-time between charges
- 220 CCA gives strong cold-weather starting power
- Fits Yuasa YB16CL-B, YTX19L-BS and many other part numbers
- Compact 6.97 x 3.98 x 6.18 inch case suits tight battery boxes
Specifications
| Battery Pack | 1-pack |
|---|
Questions about this item
Will the 6.97" x 3.98" x 6.18" case fit my existing battery tray?
The case measures 6.97 inches long, 3.98 inches wide and 6.18 inches high; compare those dimensions with your tray before ordering.
How do I connect the Nut & Bolt terminals without stripping the threads?
Slide the ring terminals over the bolts, add the supplied nuts and tighten with a wrench until snug — overtightening cracks the lead posts.
When should I replace this 19 Ah AGM battery?
Replace it when a load test shows capacity has fallen well below 19 Ah or cold-cranking amps drop far under 220 CCA.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



