BatteryJack inc.
BatteryJack inc. Banshee PS-625 12V 19Ah AGM standard battery
A 12 V 19 Ah AGM battery with 220 CCA for motorcycles, ATVs, UTVs and personal watercraft
- Battery Pack1-pack
- Reliable cold starts with 220 CCA rating
- Maintenance-free AGM design eliminates fluid checks
- Direct replacement for YB16CL-B and YTX19L-BS models
- Compact 6.97" x 3.98" x 6.18" footprint fits tight spaces
- Powers ATVs, motorcycles, PWCs and UTVs with 19 Ah capacity
Banshee PS-625 12V 19Ah AGM battery
The Banshee PS-625 is a sealed AGM lead-acid battery rated at 12 volts and 19 amp-hours at the 10-hour rate. It supplies 220 cold cranking amps for reliable starting in motorsport applications. The unit fits ATVs, motorcycles, personal watercraft and UTVs that require this capacity and voltage.
Sustained load behaviour
The AGM chemistry delivers steady voltage during extended cranking and accessory loads without the voltage sag common in flooded cells. Sealed construction prevents electrolyte loss so capacity remains consistent over repeated deep discharges. Nut-and-bolt terminals maintain low-resistance connections under vibration.
Pre-order checks
Verify that your vehicle uses a 12-volt 19Ah battery with nut-and-bolt terminals and the listed case dimensions of 6.97 by 3.98 by 6.18 inches. Confirm the original part number matches the cross-reference list such as YB16CL-B or YTX19L-BS. Ensure the mounting orientation suits a sealed AGM design.
Highlights
- Reliable cold starts with 220 CCA rating
- Maintenance-free AGM design eliminates fluid checks
- Direct replacement for YB16CL-B and YTX19L-BS models
- Compact 6.97" x 3.98" x 6.18" footprint fits tight spaces
- Powers ATVs, motorcycles, PWCs and UTVs with 19 Ah capacity
Specifications
| Battery Pack | 1-pack |
|---|
Questions about this item
Does the 12V 19Ah AGM battery run hot or make noise during extended use?
The sealed AGM design has no moving parts and produces no audible noise; normal operation stays at ambient temperature with no active cooling required.
What terminal hardware is needed to install the PS-625 in my vehicle?
The battery uses nut-and-bolt terminals, so you will need the matching bolts and nuts plus a wrench or socket to secure the cables.
Will the 6.97 x 3.98 x 6.18 inch case fit the tray that held a YB16CL-B on my Yamaha Wave Runner?
Yes, the PS-625 is listed as a direct replacement for the YB16CL-B and shares the same physical footprint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



