BatteryJack inc.
BatteryJack inc. 12V 7.0Ah 7.5AH SLA Battery F1 Terminal
A 12 V sealed lead-acid battery rated at 7.0 Ah or 7.5 Ah with F1 terminals, built using AGM technology for maintenance-free operation in UPS, mobility, solar and portable-tool applications
- Reliable power from advanced AGM technology
- Lasts four to seven years in service
- Direct 100% OEM replacement fit
- Zero maintenance with sealed construction
- Three-year warranty on UPS and backup devices
12V 7.5Ah SLA Battery
This sealed lead-acid battery uses advanced AGM technology to deliver 12 volts and 7.5 ampere-hours of capacity. It is designed as a 100% OEM replacement for a wide range of devices requiring reliable backup power. The maintenance-free construction eliminates the need for water top-ups during its service life. It suits users needing dependable energy for security systems, mobility aids, or portable equipment.
Capacity and runtime limits
The 7.5Ah rating provides sufficient headroom for typical backup duties such as emergency lighting, access control panels, or small mobility scooters. It will sustain low-draw loads for extended periods but depletes quickly under high-current demands like engine starting or large inverters. Expected service life spans four to seven years under normal float conditions. Runtime falls short for applications requiring continuous high-wattage discharge.
F1 terminal integration
The F1 terminal type ensures a secure push-on connection compatible with standard wiring harnesses in UPS units, alarm panels, and medical devices. Physical dimensions of 5.94 length, 2.56 width, and 3.66 height allow it to fit existing battery compartments without modification. The sealed AGM design permits operation in any orientation, freeing up mounting options inside tight enclosures. No venting provisions are required around the unit.
Highlights
- Reliable power from advanced AGM technology
- Lasts four to seven years in service
- Direct 100% OEM replacement fit
- Zero maintenance with sealed construction
- Three-year warranty on UPS and backup devices
Specifications
No published specifications for this item yet.
Questions about this item
Will this 12V 7.5Ah SLA battery with F1 terminals fit the existing slot in my older UPS that used a 7.0Ah unit?
Yes, the 5.94 by 2.56 by 3.66 inch case and F1/T1 terminals match the common 7.0Ah footprint, so it slides into the same compartment and connects without adapters.
How can I confirm the battery is healthy after installing it in my backup system?
Measure the open-circuit voltage with a multimeter; a reading at or near 12 volts indicates a full charge, and the UPS self-test should then pass without a low-battery warning.
Does the box include any mounting brackets or cables, or must I supply them separately?
Only the sealed AGM battery with F1 terminals is supplied; mounting hardware, interconnect cables or ring-terminal leads are not included and must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
