BatteryJack inc.
BatteryJack inc. 12V 18AH Standard Battery
A 12V 18AH sealed AGM battery with 90% gas recombination and 100% OEM replacement compatibility
- 12V 18AH capacity powers UPS and backup systems
- Advanced AGM technology enables maintenance-free operation
- Sealed non-spillable design allows safe use in any position
- Over 90% gas recombination extends expected life to 4-7 years
- 100% OEM replacement for NP18-12 and compatible models
Purpose & Fit
The BatteryJack inc. 12V 18AH Standard Battery is a sealed AGM unit built as a 100% OEM replacement for NP18-12, 51814, 6FM17, 6-DZM-20 and 6-FM-18 models. It suits UPS units, alarm panels, emergency lighting and backup systems that require a maintenance-free 12 volt 18 ampere-hour power source. Buyers needing a higher capacity or a different voltage platform should look elsewhere.
Thermals, Noise & Power
The Absorptive Glass Mat system absorbs sufficient electrolyte to prevent leakage and enables gas recombination of over 90% during normal use. No electrolyte checks or water top-ups are required throughout the expected floating service life of 4 to 7 years. The sealed, non-spillable construction operates silently and without thermal management concerns in any mounting position.
Build & Connections
Sealed construction ensures no electrolyte can escape from the terminals or case, meeting International Air Transport Association non-spillable classification for safe transport. The position-free design allows installation upright, sideways or inverted without affecting performance or safety. Terminals match the referenced OEM part numbers for direct drop-in compatibility.
Highlights
- 12V 18AH capacity powers UPS and backup systems
- Advanced AGM technology enables maintenance-free operation
- Sealed non-spillable design allows safe use in any position
- Over 90% gas recombination extends expected life to 4-7 years
- 100% OEM replacement for NP18-12 and compatible models
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the 12V 18AH AGM battery and which step do people often miss?
Mount the battery in any orientation, connect the red lead to the positive terminal and the black lead to the negative terminal, then torque the terminal bolts to the value shown in the equipment manual — skipping the torque step is the most common mistake.
What maintenance or replacement will the 12V 18AH AGM battery need later?
The sealed AGM design is maintenance-free for its 4-7 year expected life; no water or electrolyte checks are possible, so plan a full replacement once capacity drops below the needs of your UPS or backup device.
What limit appears first on the 12V 18AH AGM battery under sustained use?
Continuous discharge is limited by the 18 ampere-hour capacity; once that energy is depleted the voltage falls and the battery must be recharged before further use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



