Batianda
Batianda 24V to 12V 165A 1980W Waterproof DC Buck Converter 2 in 1 accessory
Steps 24 V DC down to a fixed 12 V at 165 A with IP68 waterproofing and 95 % efficiency
- Converts 24 V vehicle power to stable 12 V for accessories
- Up to 97 % efficiency reduces heat and saves battery capacity
- IP68 aluminium housing withstands water, dust and shock
- Five protection circuits guard against overload, over-temperature and short circuits
- Fixed 12 V output at 165 A delivers 1980 W for high-power loads
Purpose and users
This Batianda step-down converter turns a 24V DC battery into a stable 12V supply for heavy loads. It suits installers running truck audio, LED lighting, monitoring gear or DIY 12V systems from a 24V source.
What the bundle changes
The IP68 aluminium-and-silicone enclosure adds waterproof, dust-proof and shock-resistant operation without extra sealing work. Synchronised rectification pushes efficiency to 97% at half load and 95% at full load, cutting heat and the need for large external heatsinks.
Check before ordering
Verify your source is a lead-acid or lithium battery between 18V and 35V; solar panels or wind turbines will destroy the unit. Ensure the load never exceeds 165A and that you fit a correctly rated fuse on the input cable. Keep polarity correct and provide free airflow around the 300×195×90mm case.
Highlights
- Converts 24 V vehicle power to stable 12 V for accessories
- Up to 97 % efficiency reduces heat and saves battery capacity
- IP68 aluminium housing withstands water, dust and shock
- Five protection circuits guard against overload, over-temperature and short circuits
- Fixed 12 V output at 165 A delivers 1980 W for high-power loads
Specifications
No published specifications for this item yet.
Questions about this item
Will the aluminium case and IP68 seals need any periodic maintenance?
The IP68-rated aluminium housing is sealed with silicone, so no internal servicing is required; only check external wiring and keep ventilation clear.
At full 165 A load the converter hits 95 % efficiency — what limits continuous operation first?
At 1980 W output the case temperature must stay below 85 °C; if airflow is restricted the over-temperature protection will shut the unit down before any component fails.
How much heat and noise should I expect when it runs all day in a truck cab?
The converter has no fan, so it is silent; waste heat at 95 % efficiency is conducted through the 300 × 195 × 90 mm aluminium shell, which stays within the −40 to 85 °C operating range with normal air flow.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
