Batianda
Batianda 20M LC to ST Outdoor Armored Duplex 9/125 SM Fiber Optic Cable 2 in 1 accessory
A 20 metre singlemode fiber patch cord with LC to ST duplex connectors and an armored jacket for outdoor durability
- 20 metre singlemode link spans long indoor or outdoor runs
- 9/125 µm core supports standard singlemode equipment
- LC to ST duplex connectors join dissimilar patch panels
- Armored metal sheathing resists dust, moisture, oil and rodents
- Carrier-class ceramic ferrules deliver low loss and high reliability
20-Metre Armored Singlemode Patch Cord
This 20-metre outdoor armored duplex cable connects LC and ST interfaces on singlemode 9/125 fibre. A metal sheathing inside a robust outer jacket protects the glass core from dust, oil, moisture and rodent damage. Ceramic ferrules on both ends deliver low insertion loss for carrier-class LAN, WAN and voice links. The assembly is factory tested and ships new.
Suited for Harsh-Environment Links
Installers running fibre between buildings, through ducts or across industrial sites gain the mechanical protection of armor without sacrificing standard connector compatibility. The weatherproof jacket withstands sun and rain but the supplier advises against direct burial or aerial suspension, so projects requiring those methods should specify a different cable type. Buyers needing multi-mode fibre or alternative connector polishes must source a separate assembly.
20 Metres of Singlemode Headroom
At 20 metres the link budget comfortably covers typical campus or building-to-building runs with ample margin for connector loss and future patch-panel moves. The 9/125 core supports gigabit and 10-gigabit singlemode transceivers over this distance without signal degradation. Runs significantly longer than 20 metres or high-density patch fields requiring higher fiber counts will exceed the practical reach or capacity of this single duplex jumper.
Highlights
- 20 metre singlemode link spans long indoor or outdoor runs
- 9/125 µm core supports standard singlemode equipment
- LC to ST duplex connectors join dissimilar patch panels
- Armored metal sheathing resists dust, moisture, oil and rodents
- Carrier-class ceramic ferrules deliver low loss and high reliability
Specifications
No published specifications for this item yet.
Questions about this item
What connectors must my equipment have to use this 20-meter LC-to-ST singlemode fiber cable?
Your devices need LC/PC and ST/PC ports operating at 9/125 microns to match the cable's duplex singlemode connectors.
Can I run this armored cable alongside older multimode patch cords in the same rack?
Yes, the armored duplex cable is compatible with standard fiber equipment, but singlemode and multimode fibers must not be mixed on the same link.
How do I verify the 20-meter run is performing correctly after installation?
Check that both ceramic connectors show low loss with a light source and power meter; the cable is 100 percent tested before delivery.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
