Barrow Mods
Barrow Mods ONWOTE 16 Port Ethernet PoE Switch 300W 2 Uplink Gigabit RJ45 1 SFP 2 in 1 Accessories
16 PoE ports deliver up to 30 W each with a 300 W total budget, plus two Gigabit uplinks and one SFP slot for fibre links
- 16 PoE ports power cameras and carry data
- Two gigabit RJ45 uplinks plus one SFP slot for flexible backbone links
- 300 W total budget with up to 30 W per port
- 4 W average per port supports many 4K 8MP cameras
- 24/7 technical support available by message or phone
16-Port PoE Switch for IP Camera Networks
The Barrow Mods ONWOTE switch delivers 16 Fast Ethernet PoE ports, two Gigabit RJ45 uplinks and one Gigabit SFP uplink in a single 300 W unit. It targets installers who need to power and connect multiple 4K, 8 MP or 5 MP PoE security cameras from one central location.
Upgrade from Smaller Injectors or Non-PoE Switches
Replacing a basic injector or a non-PoE switch becomes worthwhile when camera counts exceed the port or power budget of existing gear. The 300 W total budget and 30 W per-port maximum let you consolidate mid-span injectors and add cameras without hunting for extra mains outlets.
300 W Budget Handles Typical Multi-Camera Loads
Each port supplies up to 30 W with a 15.4 W average, so a full complement of 16 cameras drawing 15 W each fits comfortably within the 300 W envelope. Systems that demand sustained 30 W on every port simultaneously will exceed the available headroom and require additional power sources.
Highlights
- 16 PoE ports power cameras and carry data
- Two gigabit RJ45 uplinks plus one SFP slot for flexible backbone links
- 300 W total budget with up to 30 W per port
- 4 W average per port supports many 4K 8MP cameras
- 24/7 technical support available by message or phone
Specifications
No published specifications for this item yet.
Questions about this item
What rack or shelf space does the 16-port PoE switch need?
The unit is a 2-in-1 accessory designed for standard rack mounting; allow a 2U slot and AC100-240V mains access for the 300W supply.
Which uplink port should I connect first during setup?
Plug the NVR or router into one of the 2x 1000M RJ45 uplinks or the 1x Gigabit SFP slot before powering on; the 16 PoE ports negotiate 10/100M automatically.
When will the internal fan or power supply need replacement?
The 300W AC100-240V supply runs continuously; plan to inspect the fan and capacitors after 24 months of 24/7 operation.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
