Barrow Mods
Barrow Mods M12 X-Code 8 Pin Male to Male Cat6a Cable IP67 5m 2 in 1 accessory
Shielded Cat6a cable with IP67-rated M12 X-coded connectors for industrial cameras and machinery
- Reliable in harsh environments with IP67 dust and water resistance
- Suits Cognex and Basler Ace 2 industrial cameras and machine vision systems
- Double shielded braid plus foil cuts EMI and crosstalk
- Highly flexible cable withstands repeated bending for longer service life
- 5 m length with M12 X-Code 8-pin male connectors on both ends
M12 X-Code 8 Pin Cable for Industrial Cameras
This M12 X-Code 8 pin male-to-male cable connects Cognex and Basler Ace 2 industrial cameras to machine vision networks. It carries Cat6a Ethernet signals over a 5 metre run. The IP67 rating protects the connection in wet or dusty environments. It is built for factory automation and fieldbus modules.
High-flex shielded design installs in moving
The high-flex jacket withstands repeated bending and stretching on robotic arms or drag chains. Double braid and foil shielding blocks EMI and RFI while twisted pairs reduce crosstalk. Installers must align the X-Code keyway correctly; forcing the connector damages the pins. Cable routing should avoid sharp edges that could abrade the outer jacket.
Cat6a bandwidth decides suitability for vision data
The Cat6a classification determines whether the link handles the camera’s full frame rate and resolution without packet loss. Lower-category cables will bottleneck high-speed vision streams. Verify the camera’s required throughput before specifying this link.
Highlights
- Reliable in harsh environments with IP67 dust and water resistance
- Suits Cognex and Basler Ace 2 industrial cameras and machine vision systems
- Double shielded braid plus foil cuts EMI and crosstalk
- Highly flexible cable withstands repeated bending for longer service life
- 5 m length with M12 X-Code 8-pin male connectors on both ends
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the M12 X-Code 8-pin link is running at Cat6a performance after installation?
Confirm the connected industrial camera or machine-vision system negotiates a gigabit Ethernet link and shows zero packet loss during sustained data transfer.
What comes in the box and do I need separate connectors for the M12 X-Code 8-pin male ends?
The 5 m double-shielded cable arrives with both M12 X-Code 8-pin male plugs factory-fitted; no extra connectors are required.
Which length version should I choose for a Cognex or Basler Ace 2 camera run?
This listing supplies the 5 m (16.4 ft) high-flex variant; contact the seller before ordering if a different length is needed.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
