Barrow Mods
Barrow Mods 2 in 1 accessory 14.0 inch FHD 1920x1080 30 pin matte with brackets
14.0 inch FHD matte LCD panel with 30-pin connector and brackets for Dell Latitude 3480
- 0" FHD clarity for sharp visuals
- 30-pin connector matches Dell Latitude 3480
- Matte finish reduces glare in bright light
- Brackets included for straightforward installation
- ISO 13406 tested with under 3-5 dead pixels
14.0" FHD replacement panel
This 14.0 inch FHD LCD panel delivers 1920x1080 resolution through a 30-pin connector positioned at the bottom right. It is a non-touch, matte-finish screen supplied with mounting brackets for direct installation. The component is built to serve as a drop-in replacement for compatible Dell Latitude 3480 units.
ISO-tested build with brackets
Every unit undergoes 100 percent testing to meet ISO-13406 pixel standards, allowing fewer than 3 to 5 dead pixels per screen. The included brackets simplify mounting without sourcing separate hardware. Supplier experience spans more than 15 years and over 80 countries, with a stock range covering sizes from 7 to 23.8 inches and more than 500 popular models.
Connector and model matching required
The 30-pin interface and bottom-right connector placement restrict compatibility to panels sharing the exact pinout and physical layout. Buyers who need a touch-enabled layer or a different connector count cannot use this screen. Verify the original panel model, backlight type, size, connector type and resolution before ordering.
Highlights
- 0" FHD clarity for sharp visuals
- 30-pin connector matches Dell Latitude 3480
- Matte finish reduces glare in bright light
- Brackets included for straightforward installation
- ISO 13406 tested with under 3-5 dead pixels
Specifications
No published specifications for this item yet.
Questions about this item
Does the 30-pin connector on this 14.0 inch FHD panel match the Dell Latitude 3480 motherboard?
The 30-pin bottom-right connector is built to the specification used by the Dell Latitude 3480, so it plugs straight into that model's motherboard.
Will the included brackets line up with the existing screw holes on a 14.0 inch Dell Latitude 3480 lid?
The brackets are sized for the 14.0 inch chassis used on the Latitude 3480, so the mounting holes should align without drilling.
What is the correct order for routing the 30-pin cable through the hinge before securing the brackets?
Feed the 30-pin cable through the hinge opening first, then seat the panel and fasten the brackets; reversing the order traps the cable.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
