Banner
Banner T30UXIAQ8 Ultrasonic Sensor 100-1000mm 4-20mA M12
Ultrasonic proximity sensor with 4–20 mA analog output, 100–1000 mm range, temperature compensation and M12 quick-disconnect
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Accurate detection from 100 mm to 1000 mm range
- Stable 4-20 mA analog output over 10-30 V dc supply
- Temperature compensation limits drift to 0.02% per degree Celsius
- Teach button enables quick setup without PC configuration
- M12 Euro quick-disconnect survives 30G shock and 10-60 Hz vibration
Ultrasonic Sensor 100-1000mm Range
The Banner T30UXIAQ8 is an ultrasonic proximity sensor designed for industrial automation and distance measurement tasks. It detects objects from 100 mm to 1000 mm using time-of-flight technology. The barrel-style housing is made from PBT material and includes LED indicators for status monitoring. It operates on a 10 to 30 V dc supply with a 500 ms power-up delay.
Analog 4-20 mA Output Configuration
The decisive specification is the analog output configured as a 4 to 20 mA current loop. This provides a continuous signal proportional to the measured distance across the full sensing range. The output supports a maximum load resistance calculated from the supply voltage. Resolution is specified as 0.1% of distance with a 0.5 mm minimum repeatability. A teach button allows for setup adjustments without a PC.
Temperature Compensation and Shock Resistance
Temperature effect is rated at 0.02% of sensing distance per degree Celsius, providing stable readings across environmental changes. The sensor meets MIL-STD-202F Method 201A for vibration up to 60 Hz and IEC 60947-5-2 for 30G mechanical shock. Output saturation voltage stays below 1.6 V for NPN and 3 V for PNP at 100 mA. The M12 quick-disconnect ensures a secure connection.
Highlights
- Accurate detection from 100 mm to 1000 mm range
- Stable 4-20 mA analog output over 10-30 V dc supply
- Temperature compensation limits drift to 0.02% per degree Celsius
- Teach button enables quick setup without PC configuration
- M12 Euro quick-disconnect survives 30G shock and 10-60 Hz vibration
Specifications
| Brand | BANNER |
|---|---|
| Model | T30UXIAQ8 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How does the 0.1 % distance repeatability translate to actual millimetres at the 1000 mm maximum range?
At the 1000 mm maximum range the 0.1 % repeatability equals 1 mm; the specification also sets a 0.5 mm floor, so the practical repeatability is the larger of the two values.
What load resistance does the 4-20 mA loop allow at a 24 V supply?
The sensor specifies a 1 k? maximum at 24 V dc; the formula [(Vcc-4.5 V)/0.02 A] gives the same upper limit for a 24 V supply.
What clearance is needed for the integral M12 quick-disconnect?
The barrel housing carries a 4-pin Euro-style M12 connector on the end, so allow space for the mating cable straight or right-angle boot plus the 30 mm barrel diameter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
