Banner
Banner T186EQ Photoelectric Sensor Emitter 20 m 10-30 V dc M12 4-pin IP67 IP69
Infrared emitter with 20 m range, 10-30 V dc supply, M12 4-pin connector and IP67/IP69 washdown rating
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 20 m sensing range for long-distance detection
- 10-30 V dc supply fits common industrial power
- M12 4-pin quick-disconnect enables fast installation
- IP67 and IP69 ratings withstand washdown environments
- 40 °C to 70 °C operation suits harsh conditions
Purpose-built emitter for opposed-mode sensing
The Banner T186EQ is an infrared emitter designed for long-range opposed-mode photoelectric sensing. It operates on a 10-30 V dc supply and connects via an integral M12 4-pin Euro quick-disconnect. The barrel housing measures 18 mm in diameter and is constructed from thermoplastic with a polycarbonate lens.
Sealed housing handles washdown
Rated IP67 and IP69, the sensor withstands high-pressure washdown and temporary immersion. It carries NEMA 6P and Ecolab certifications plus chemical resistance for harsh environments. Operating temperature spans -40 °C to 70 °C with up to 90 % relative humidity at 50 °C. Power-up delay is 100 ms and the unit draws no load current as an emitter-only device.
Steady output over 20 m without timing functions
The infrared beam reaches 20 m with a repeatability of 375 µs for consistent detection. No hold or delay timing features are present, so the emitter runs continuously once powered. Encapsulated construction and a health or marginal signal output support long-term reliability in fixed installations. The part carries manufacturer part number 33420.
Highlights
- 20 m sensing range for long-distance detection
- 10-30 V dc supply fits common industrial power
- M12 4-pin quick-disconnect enables fast installation
- IP67 and IP69 ratings withstand washdown environments
- 40 °C to 70 °C operation suits harsh conditions
Specifications
| Brand | BANNER |
|---|---|
| Model | T186EQ |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I mount the 18 mm barrel emitter and wire the M12 4-pin Euro connector without reversing polarity?
Secure the 18 mm thermoplastic barrel with standard M18 hardware, then plug the integral M12 4-pin quick-disconnect into a 10-30 V dc supply observing pinout; the emitter has no output so only power pins are used.
What ongoing maintenance does the IP67 IP69 emitter need in washdown environments?
Periodically wipe the polycarbonate lens clean; the encapsulated housing is Ecolab certified and chemical resistant, so no internal servicing is required beyond external lens inspection.
At what temperature does the 20 m infrared beam risk reduced reliability during continuous operation?
The emitter is rated to 70 °C maximum operating temperature; sustained use above this limit will degrade the infrared LED output and repeatability of 375 µs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
