Banner
Banner SLM50N6Q rugged metal slot sensor 50 mm 10-30 V dc NPN M8 3-pin
Rugged nickel-plated metal slot sensor with a 50 mm slot width, 10-30 V dc supply, NPN output and M8 3-pin quick disconnect
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 50 mm slot detects 0.6 mm objects at 10-30 V dc
- NPN output with 0.5 ms response and 95 µs repeatability
- Nickel-plated zinc housing rated IP67 and NEMA 6
- Integral M8 3-pin quick-disconnect for fast wiring
- Operates from -20 °C to 60 °C at 95 % humidity
Rugged metal slot sensor 50 mm
The Banner SLM50N6Q is a nickel-plated zinc die-cast slot sensor with a 50 mm slot width and 60.8 mm array length. It operates on 10-30 V dc supply voltage and provides an NPN output through an integral M8 3-pin Pico quick-disconnect. The housing meets IP67 and NEMA 6 ratings for harsh environments.
Replaces sensors lacking rugged housing
Upgrading from plastic-bodied or lower-rated sensors is justified when the application demands IP67 protection, a -20 to 60 °C operating range, and 95 % humidity tolerance at 55 °C. The .5 ms response time and 95 µs repeatability suit high-speed detection of objects as small as .6 mm.
Suits automated lines needing fixed-distance
Ideal for conveyor positioning, part verification, and edge detection where a durable metal housing and remote-teach-free setup are required. Not suited for applications requiring analog output, PNP switching, or a sensing range beyond 50 mm. Buyers needing a different slot depth or connector type should consider other models.
Highlights
- 50 mm slot detects 0.6 mm objects at 10-30 V dc
- NPN output with 0.5 ms response and 95 µs repeatability
- Nickel-plated zinc housing rated IP67 and NEMA 6
- Integral M8 3-pin quick-disconnect for fast wiring
- Operates from -20 °C to 60 °C at 95 % humidity
Specifications
| Brand | BANNER |
|---|---|
| Model | SLM50N6Q |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What clearance is needed for the 50 mm slot width and 60.8 mm slot depth of the SLM50N6Q?
The sensor has a 50 mm slot width and a 60.8 mm slot depth, so the mounting surface must accommodate those dimensions plus the 80 mm or 82 mm overall depth.
How is the M8 3-pin Pico quick-disconnect wired for the 10-30 V dc NPN output?
Connect pin 1 to 10-30 V dc, pin 3 to 0 V, and pin 4 to the NPN load; the 100 ms power-up delay means the output stays off briefly after voltage is applied.
When should the acrylic lens be cleaned and how often is the potentiometer adjustment checked?
Clean the acrylic lens whenever debris blocks the 0.6 mm minimum object detection; verify the potentiometer setting after any vibration shock or temperature cycle beyond -20 °C to 60 °C.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
