Banner
Banner QS18VP6LAF250Q5 photoelectric sensor 250 mm range 10-30 V dc PNP M12 4-pin IP67
Detects objects up to 250 mm with a Class 2 visible red laser, adjustable background suppression, PNP output on a 4-pin M12 pigtail, and IP67-rated ABS housing for 10–30 V dc supply
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Adjustable background suppression up to 250 mm
- Visible red Class 2 laser for precise alignment
- PNP output on 10–30 V dc supply
- IP67 and NEMA 6 rated for harsh environments
- Fast .7 ms response with 130 µs repeatability
Adjustable-field laser sensor
The Banner QS18VP6LAF250Q5 is a background-suppression photoelectric sensor with a visible red Class 2 laser. Its sensing cutoff adjusts mechanically between 50 mm and 250 mm, and the beam produces a small visible spot for precise alignment. The rectangular ABS housing carries an M12 four-pin pigtail connector and meets IP67 and NEMA 6 sealing. It operates on 10-30 V dc and switches a PNP output.
Suitable for short-range presence detection
This unit suits automation tasks that need a defined sensing window and background rejection, such as part verification on conveyors or positioning in packaging machines. The 0.7 ms response time and 130 µs repeatability support fast cycling. Buyers who need remote teaching, intrinsic safety certification, or a sensor rated for hazardous-area installation should look at other models because those features are absent here.
Cutoff adjustment range decides fit
The single specification that determines whether this is the right part is the mechanically adjustable cutoff point between 50 mm and 250 mm. If the application requires a fixed sensing distance, a longer maximum range, or a different output type such as NPN or analog, this sensor will not match the requirement.
Highlights
- Adjustable background suppression up to 250 mm
- Visible red Class 2 laser for precise alignment
- PNP output on 10–30 V dc supply
- IP67 and NEMA 6 rated for harsh environments
- Fast .7 ms response with 130 µs repeatability
Specifications
| Brand | BANNER |
|---|---|
| Model | QS18VP6LAF250Q5 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How much heat does the QS18VP6LAF250Q5 generate when powered continuously at 30 V dc?
The sensor draws power from a 10-30 V dc supply and operates between -10 °C and 50 °C ambient with 95 % humidity at 50 °C; no separate heat-dissipation figure is published.
What cable or connector must I already have to plug the 150 mm M12 4-pin pigtail into my control system?
You need a mating M12 4-pin (Euro) female cordset or panel-mount connector; the sensor ships with a 150 mm pigtail terminated in an M12 quick-disconnect plug.
Will the 658 nm Class 2 laser spot and 0.7 ms response time work reliably with a 15-year-old PLC input card?
The PNP output switches at 0.7 ms with 130 µs repeatability and a 200 ms power-up delay; verify your PLC input module accepts 10-30 V dc PNP signals and can scan faster than 0.7 ms.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
