Banner
Banner QS18VP6FF100Q8 photoelectric sensor 100 mm PNP M12 10-30 V dc IP67
Detects objects up to 100 mm using a 630 nm red LED with PNP output on a 4-pin M12 connector, rated IP67 and NEMA 6 for 10-30 V dc operation
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Detects objects up to 100 mm with background suppression
- PNP complementary output switches loads directly from 10-30 V dc
- M12 quick-disconnect connector speeds installation and replacement
- IP67 and NEMA 6 ratings withstand wash-down and dust
- Visible red 630 nm LED spot simplifies alignment and setup
Fixed-Field Sensor for 100 mm Range
The Banner QS18VP6FF100Q8 is a rectangular photoelectric sensor with an 18 mm barrel mount designed for fixed-field background suppression at a 100 mm cutoff. It delivers a complementary solid-state PNP output through a 4-pin M12 Euro-style quick-disconnect connector and operates on a 10-30 V dc supply across a temperature span of -20 to 70 °C. A visible red LED at 630 nm provides a small spot for precise alignment in industrial automation tasks.
Upgrading from Adjustable Background Suppression
This fixed-field model replaces sensors that require manual potentiometer adjustment for background suppression, eliminating setup drift and reducing commissioning time on high-mix production lines. The jump is worth it when the detection distance is constant and repeatability of 160 µs matters more than flexible range configuration, especially in wash-down environments where IP67 and NEMA 6 ratings protect the ABS housing and acrylic lens.
Simple M18 Mount with M12 Quick-Disconnect
Installation consists of securing the sensor via its M18 threaded barrel and plugging the integral M12 connector into a compatible cordset, with no teach procedure or remote wiring required. The 100 ms power-up delay and 0.85 ms response time are fixed, so timing-critical PLC logic must accommodate these values. Misalignment is the most common issue; the visible red spot aids setup, but the sensor cannot detect water or transparent objects reliably.
Highlights
- Detects objects up to 100 mm with background suppression
- PNP complementary output switches loads directly from 10-30 V dc
- M12 quick-disconnect connector speeds installation and replacement
- IP67 and NEMA 6 ratings withstand wash-down and dust
- Visible red 630 nm LED spot simplifies alignment and setup
Specifications
| Brand | BANNER |
|---|---|
| Model | QS18VP6FF100Q8 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What size M18 mounting hole does the 18 mm barrel sensor need?
The rectangular housing has an 18 mm barrel diameter and mounts through a standard M18 clearance hole; secure with the supplied lock nuts.
How do I wire the 4-pin M12 quick-disconnect for 10-30 V dc PNP output?
Connect brown to 10-30 V dc, blue to 0 V, black to the load for light operate, white to the load for dark operate; tighten the Euro-style connector to IP67.
When should I replace the acrylic lens or the sensor itself?
Replace the lens if the 630 nm red spot becomes scratched or clouded; the sensor has no user-serviceable parts and carries a 3-year parts, 1-year labour warranty period.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
