Banner
Banner QS18VP6FF100Q5 photoelectric sensor 100 mm PNP 10-30 V dc M12
Background-suppression photoelectric sensor detects objects up to 100 mm with a 630 nm red LED, PNP output and 10-30 V dc supply in an IP67-rated 18 mm ABS housing
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Fixed-field background suppression ignores objects beyond 100 mm
- PNP complementary solid-state output works with 10-30 V dc systems
- IP67 and NEMA 6 ratings protect against dust and water ingress
- Visible 630 nm red LED spot simplifies alignment and setup
- 85 ms response time and 160 µs repeatability suit high-speed detection
Sensor overview
The Banner QS18VP6FF100Q5 is a fixed-field photoelectric sensor designed for proximity detection up to 100 mm. It uses a visible red LED at 630 nm with background suppression to ignore objects beyond the set cutoff. The rectangular ABS housing features an 18 mm barrel diameter and M18 mounting threads. It operates on 10-30 V dc and provides complementary solid-state PNP outputs.
Suitability
This sensor suits applications that need a precise 100 mm detection point with background suppression in a compact rectangular package. It is rated IP67 and NEMA 6 for wash-down environments and functions from -20 °C to 70 °C. Buyers who need adjustable sensing distances, remote teach capability, or intrinsically safe certification should look at other models because this unit has fixed-field optics and no remote-teach or intrinsic-safety features.
Installation notes
The sensor connects via a 6-inch pigtail with a 4-pin M12 Euro-style quick-disconnect connector, simplifying wiring in the field. No mechanical adjustments are required because the sensing range is factory-set. A 100 ms power-up delay and 0.85 ms output response time are typical for this series. Ensure the mounting surface accommodates the M18 threads and that the 10-30 V dc supply matches the control system voltage.
Highlights
- Fixed-field background suppression ignores objects beyond 100 mm
- PNP complementary solid-state output works with 10-30 V dc systems
- IP67 and NEMA 6 ratings protect against dust and water ingress
- Visible 630 nm red LED spot simplifies alignment and setup
- 85 ms response time and 160 µs repeatability suit high-speed detection
Specifications
| Brand | BANNER |
|---|---|
| Model | QS18VP6FF100Q5 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What power supply voltage range must I already have available to run the QS18VP6FF100Q5 sensor?
The sensor operates on a 10-30 V dc supply, so your existing power source must deliver within that range.
Will the M12 Euro-style quick-disconnect on this sensor mate with the M12 cables I already use on older equipment?
Yes, the 4-pin M12 Euro connector is an industry-standard interface compatible with existing M12 cordsets.
How can I verify the sensor is detecting objects correctly at its 100 mm cutoff after installation?
Watch the indicator LEDs; they change state when the background-suppression beam sees a target within the 100 mm fixed field.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
