Banner
Banner QS18VP6DQ5 Photoelectric Sensor 450mm 10-30V PNP M12 IP67 electrician tool
Diffuse photoelectric sensor detects objects up to 450mm with 10-30V PNP output and M12 connector in IP67 housing
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Diffuse sensing up to 450 mm range
- 10-30 V dc supply fits common control voltages
- Complementary solid-state PNP output for direct PLC interface
- IP67 and NEMA 6 rating withstands wash-down and dust
- M12 Euro quick-disconnect enables fast installation
All-purpose photoelectric sensor for industrial
The Banner QS18VP6DQ5 is a WORLD-BEAM QS18 Series diffuse sensor built for presence detection in automation environments. It operates on a 10 to 30 V dc supply and provides a complementary solid-state PNP output through a four-pin M12 Euro-style quick-disconnect pigtail. The rectangular ABS housing features an 18 mm barrel diameter with M18 mounting threads for standard installation.
450 mm sensing range with 0.6 ms response time
The infrared LED beam reliably detects objects up to 450 mm away with a repeatability of 150 µs. Output response time is 0.6 ms, and a 100 ms power-up delay prevents false triggers during startup. Sensitivity is adjusted via an onboard potentiometer. The unit functions across a -20 to 70 °C temperature range and tolerates 95 % relative humidity at 50 °C.
Replaces slower or less rugged proximity switches
This sensor upgrades legacy mechanical or lower-speed electronic switches where faster 0.6 ms switching and IP67 or NEMA 6 sealing are required. The jump is worth it when an application demands diffuse-mode sensing with PNP logic, M12 connectivity, and operation in wet or dusty conditions. It is not suited for through-beam applications requiring separate emitter and receiver units.
Highlights
- Diffuse sensing up to 450 mm range
- 10-30 V dc supply fits common control voltages
- Complementary solid-state PNP output for direct PLC interface
- IP67 and NEMA 6 rating withstands wash-down and dust
- M12 Euro quick-disconnect enables fast installation
Specifications
| Brand | BANNER |
|---|---|
| Model | QS18VP6DQ5 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Will the 18 mm barrel and M12 pigtail fit my existing M18 mounting bracket and 4-pin M12 cable?
The sensor has an 18 mm rectangular housing with an M18 thread and a 4-pin M12 Euro pigtail quick-disconnect, so it matches standard M18 brackets and 4-pin M12 cables.
How can I verify the PNP output is switching correctly at the 450 mm range after wiring?
Apply 10-30 V dc, place a target at 450 mm, and watch the indicator LEDs; the complementary solid-state PNP output toggles with a 0.6 ms response time and 150 µs repeatability.
Does the box include the M12 mating cable and mounting hardware, or must I order them separately?
The box contains one QS18VP6DQ5 sensor with pigtail QD only; the 4-pin M12 mating cable and any mounting nuts or brackets are sold separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
