Banner
Banner OTBVN6W/Y electrician tool 10-30V dc NPN IP66 M30 1.5 2m cable
A momentary optical touch button with NPN output, 10-30V dc supply, IP66 rating and 2m cable
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Momentary optical touch button with yellow field cover
- Operates on 10-30 V dc supply voltage
- Complementary NPN output for flexible wiring
- IP66 and NEMA 1, 3, 4, 4X, 12, 13 rated enclosure
- M30 x 1.5 mounting thread with 2 m cable included
Momentary Optical Touch Button
The Banner OTBVN6W/Y is a momentary action touch button designed for single-point optical sensing in industrial environments. It operates on a 10-30V dc supply and provides a complementary NPN output suitable for control circuits. The unit mounts via an M30 x 1.5 thread and includes a 2m cable for direct wiring. Its IP66 and NEMA 1, 3, 4, 4X, 12, 13 ratings confirm suitability for washdown and outdoor installations.
Sustained Operation in Harsh Conditions
The sensor maintains reliable actuation across an operating range of -20°C to 50°C with non-condensing humidity up to 90% at 50°C. Both input and output response times are capped at 100 ms, ensuring consistent switching speed during continuous cycling. The polysulfone upper housing and thermoplastic base resist degradation from UV exposure and common industrial cleaning agents. The yellow field cover remains visible for alignment checks after prolonged service.
M30 Mounting Thread Defines Fit
The M30 x 1.5 mounting thread is the critical specification that determines whether this button fits the intended panel or bracket cut-out. No alternative thread adapters or flange options are included with the part. Builders requiring a different thread pitch, a through-hole mount, or a wireless interface must select a different model. The fixed 2m cable length also fixes the maximum routing distance without splicing.
Highlights
- Momentary optical touch button with yellow field cover
- Operates on 10-30 V dc supply voltage
- Complementary NPN output for flexible wiring
- IP66 and NEMA 1, 3, 4, 4X, 12, 13 rated enclosure
- M30 x 1.5 mounting thread with 2 m cable included
Specifications
| Brand | BANNER |
|---|---|
| Model | OTBVN6W/Y |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How much heat or noise does the OTBVN6W/Y generate when powered continuously at 30 V dc?
The optical touch button has no moving parts and draws minimal current, so it produces negligible heat and no audible noise during continuous operation.
What supply voltage and wiring must already be in place for this sensor to operate?
A 10-30 V dc source and a four-conductor cable run to the mounting location are required for power and complementary NPN output signals.
Will the M30 x 1.5 thread and 4-pin NPN interface connect directly to my existing Banner mounting bases and PLC input cards?
Yes — the M30 x 1.5 mounting thread matches standard saddle bases, and the complementary NPN output with 100 ms response time is compatible with typical PLC dc input modules.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
