We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
316 stainless steel bulkhead tank fitting with FNPT threads

Banjo

Banjo TF075SS 3/4 in FNPT 316 stainless steel trap

SKU CH-GK3K-FVG8P MPN TF075SS

316 stainless steel bulkhead tank fitting with 3/4 in FNPT connections, EPDM gasket, 150 psi rating and -20 to 150 °F range

  • TypeDrain Components
  • Corrosion-resistant 316 stainless steel body
  • Secure FNPT threaded connections on both ends
  • 150 psi pressure rating for demanding systems
  • Wide -20 to 150 °F operating temperature range

3/4 in FNPT 316 stainless steel bulkhead fitting

The Banjo TF075SS is a bulkhead tank fitting built from 316 stainless steel for corrosion resistance in plumbing and fluid-transfer systems. It uses a 3/4 in FNPT by FNPT connection and requires a 1 5/8 in mounting hole. An EPDM gasket seals the joint, and the fitting is rated for service up to 150 psi.

Capacity and headroom for pressure and temperature

The 150 psi pressure rating and -20 to 150 °F temperature range give ample headroom for typical water, chemical and low-pressure air lines. Systems that run above 150 psi or see temperatures outside this window will need a higher-rated fitting. The 3/4 in bore limits flow in high-volume applications.

Highlights

  • Corrosion-resistant 316 stainless steel body
  • Secure FNPT threaded connections on both ends
  • 150 psi pressure rating for demanding systems
  • Wide -20 to 150 °F operating temperature range

Specifications

TypeDrain Components
BrandBanjo
ModelTF075SS

Questions about this item

Will the 3/4 in FNPT threads mate with my existing 3/4 in FNPT fittings?

Yes, both ports use 3/4 in FNPT threads so they connect directly to matching male NPT pipe or adapters.

How can I confirm the 316 stainless body is sealing properly after installation?

Pressurise the system up to 150 psi and check for leaks at the gasket and threads; the EPDM gasket and 316 SS body are rated for -20 to 150 degrees F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.