We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polypropylene 45 degree street elbow trap 1-1/2 inch Schedule 80

Banjo

Banjo SL150-45 45 Degree Street Elbow Trap 1-1/2" Schedule 80 300 psi

SKU CH-XPE8-AH3AP MPN SL150-45

A 45-degree street elbow in Schedule 80 polypropylene rated for 300 psi and -20 to 150 °F

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • 45-degree elbow redirects flow efficiently in tight piping layouts
  • Schedule 80 polypropylene construction handles 300 psi maximum operating pressure
  • Male and female NPT threads allow direct connection to 1-1/2 inch pipe
  • Wide temperature range from -20 to 150 degrees Fahrenheit suits varied environments
  • Black polypropylene resists corrosion and chemical attack for long service life

45 Degree Street Elbow 1-1/2" Schedule 80

This Banjo SL150-45 is a 45 degree street elbow made from polypropylene for Schedule 80 piping systems. It carries a 300 psi maximum operating pressure and handles temperatures from -20 to 150 degrees Fahrenheit. The fitting connects a 1-1/2 inch female NPT thread to a 1-1/2 inch male NPT thread. Overall length measures 3 1/32 inches with a 2 1/2 inch male end length.

Suited for industrial fluid routing

This elbow suits installers who need a 45 degree directional change in a Schedule 80 polypropylene system rated for 300 psi. It is not for buyers who require a different bend angle, a different nominal pipe size, or a material other than polypropylene. It also does not fit applications exceeding the stated pressure or temperature limits.

45 degree angle with 300 psi pressure rating

The single specification that decides fit is the 45 degree street elbow geometry combined with the 300 psi Schedule 80 rating for 1-1/2 inch NPT threads. Verify that your system uses exactly this angle, size, schedule and pressure class before ordering.

Highlights

  • 45-degree elbow redirects flow efficiently in tight piping layouts
  • Schedule 80 polypropylene construction handles 300 psi maximum operating pressure
  • Male and female NPT threads allow direct connection to 1-1/2 inch pipe
  • Wide temperature range from -20 to 150 degrees Fahrenheit suits varied environments
  • Black polypropylene resists corrosion and chemical attack for long service life

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandBanjo
ModelSL150-45

Questions about this item

How do I install the 1-1/2" NPT male and female threads without cross-threading?

Hand-tighten the Schedule 80 polypropylene elbow until snug, then turn one to two extra turns with a strap wrench; the 45-degree sweep aligns flow but over-torquing strips the coarse 11-1/2 TPI threads.

What replacement schedule should I follow for the polypropylene body?

Inspect annually for UV chalking or stress cracks near the 3-1/32" overall length; replace immediately if the black material turns white or weeps at 300 psi rating.

At what temperature does the 300 psi pressure rating begin to drop?

The 300 psi maximum holds to 150 °F; above that the Schedule 80 polypropylene softens and the pressure limit falls sharply.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.