We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polypropylene pipe nipple, threaded both ends

Banjo

Banjo NIP150-6 1-1/2" MNPT x 6" TBE Polypropylene Pipe Nipple Sch 80 trap

SKU CH-0S5Q-S1KHW MPN NIP150-6

Schedule 80 polypropylene nipple with 1-1/2 inch male NPT threads on both ends, 6 inches long, rated to 150 psi and 150 degrees F for non-potable chemical-resistant service

  • TypeDrain Components
  • MaterialHAWA
  • ColorBlack
  • Schedule 80 rating handles 150 psi pressure
  • Polypropylene construction resists chemical corrosion
  • 150 °F maximum operating temperature suits hot lines
  • Male NPT threads connect without adapters
  • Black finish identifies non-potable water lines

Schedule 80 polypropylene nipple

This 1-1/2 inch male NPT pipe nipple is made from black polypropylene for non-potable water systems. It suits installers who need chemical-resistant Schedule 80 fittings in industrial or agricultural plumbing. The threaded ends connect directly to compatible female NPT ports without adapters.

Pressure and temperature envelope

The fitting handles a maximum operating pressure of 150 psi across a temperature range of 0 to 150 degrees Fahrenheit. It maintains structural integrity under sustained pressure rather than only brief test spikes. The polypropylene construction resists degradation from many chemicals found in process lines.

Thermal and chemical behaviour

Polypropylene remains stable at the rated temperature limits without softening or becoming brittle in normal service. The material does not corrode or add taste to the fluid stream. Its lightweight nature reduces mechanical stress on connected piping during thermal cycling.

Highlights

  • Schedule 80 rating handles 150 psi pressure
  • Polypropylene construction resists chemical corrosion
  • 150 °F maximum operating temperature suits hot lines
  • Male NPT threads connect without adapters
  • Black finish identifies non-potable water lines

Specifications

TypeDrain Components
MaterialHAWA
ColorBlack
BrandBanjo
ModelNIP150-6

Questions about this item

Does the polypropylene nipple get hot or noisy when water runs through it continuously at 150 psi?

The Schedule 80 polypropylene nipple has no moving parts, so it produces no noise and does not generate heat under continuous flow at the rated 150 psi.

What thread sealant or tape do I need to make the 1-1/2" MNPT connections leak-free?

Use PTFE tape or pipe-thread sealant rated for Schedule 80 polypropylene fittings on the 1-1/2" male NPT threads.

Will this black Schedule 80 nipple thread directly into my existing galvanised steel piping?

The male NPT threads match standard 1-1/2" NPT female openings, so it threads into galvanised steel, but use a dielectric union if dissimilar-metal corrosion is a concern.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.