We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black polypropylene 90-degree elbow with 3/8-inch barb and 1/2-inch MNPT threads, 15/16-inch hex head

Banjo

Banjo HB050/038-90 3/8" Barb x 1/2" MNPT 90° Elbow Trap

SKU CH-2M27-24BKF MPN HB050/038-90

Connects 3/8" hose to 1/2" male NPT with a 90° polypropylene elbow rated from -20° to 150°F

  • TypeDrain Components
  • ColorBlack
  • Polypropylene body resists chemicals and corrosion
  • 90-degree elbow routes hose around tight corners
  • 3/8-inch barb grips hose securely without clamps
  • 1/2-inch male NPT threads into standard fittings
  • Operating range from -20 to 150 degrees Fahrenheit

3/8" Barb to 1/2" MNPT Elbow

This polypropylene elbow fitting connects 3/8 inch hose to 1/2 inch male NPT threads at a 90-degree angle. It suits fluid-transfer assemblies where a right-angle transition is required. The black finish resists UV exposure in outdoor installations.

Capacity and headroom

The barb accepts 3/8 inch inner-diameter hose while the threaded end seals into 1/2 inch NPT ports. Polypropylene construction handles temperatures from -20 to 150 degrees F. It is not rated for vacuum service, so suction-line use should be avoided.

15/16 inch hex for installation

A 15/16 inch hex head allows standard wrench engagement during assembly. The fitting is reusable and rated for the stated temperature range. Buyers needing a straight connector or a different thread size should select another part.

Highlights

  • Polypropylene body resists chemicals and corrosion
  • 90-degree elbow routes hose around tight corners
  • 3/8-inch barb grips hose securely without clamps
  • 1/2-inch male NPT threads into standard fittings
  • Operating range from -20 to 150 degrees Fahrenheit

Specifications

TypeDrain Components
ColorBlack
BrandBanjo
ModelHB050/038-90

Questions about this item

Will the 3/8 inch barb connect to my existing 3/8 inch ID hose without leaks?

The 3/8 inch hose barb is designed for 3/8 inch inside-diameter hose; secure it with a clamp for a tight seal.

How can I verify the 90 degree elbow is seated correctly after installation?

The 15/16 inch hex head lets you tighten the 1/2 inch MNPT thread until the elbow sits firmly at 90 degrees with no visible gaps.

Does the box include hose clamps or thread sealant for the 1/2 inch NPT side?

Only the black polypropylene elbow is supplied; clamps for the 3/8 inch barb and sealant for the 1/2 inch NPT thread must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.