We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Polypropylene cam lever coupling, 3/4 inch male adapter to FNPT, grey body with locking arms

Banjo

Banjo 75A1/2 3/4" Male Adapter x FNPT Cam Lever Coupling Trap

SKU CH-JDRH-8EHZR MPN 75A1/2

A 3/4 inch male adapter with FNPT cam lever coupling for drain components, rated to 225 psi at 70 degrees

  • TypeDrain Components
  • MaterialHAWA
  • Polypropylene body resists corrosion
  • EPDM gasket seals reliably up to 225 psi at 70 F
  • Type A cam lever enables quick tool-free connections
  • 3/4 inch male adapter fits 1/2 inch FNPT threads
  • Compact 2 inch overall length suits tight installations

3/4" Male Adapter Drain Component

The Banjo 75A1/2 is a Type A cam and groove adapter made from polypropylene. It provides a 3/4 inch male adapter connection with a 1/2 inch FNPT thread size. The body material offers chemical resistance for fluid handling. It has a maximum working pressure of 225 psi at 70 F.

Suits 1/2" NPT plumbing needing quick disconnect

This adapter suits installers joining a 3/4 inch cam lever coupling to a 1/2 inch female NPT thread. It is not for systems requiring a locking arm or a different gasket material than EPDM. Buyers needing a larger coupling size or a hose barb fitting should look elsewhere. The 2 inch overall length fits compact assemblies.

225 psi at 70 F working pressure limit

The single specification that decides fit is the maximum working pressure of 225 psi at 70 F. Exceeding this pressure risks failure of the polypropylene body or EPDM gasket. Verify the system operating pressure stays below this rating before installing. The 1/2 -14 thread size must match the mating component exactly.

Highlights

  • Polypropylene body resists corrosion
  • EPDM gasket seals reliably up to 225 psi at 70 F
  • Type A cam lever enables quick tool-free connections
  • 3/4 inch male adapter fits 1/2 inch FNPT threads
  • Compact 2 inch overall length suits tight installations

Specifications

TypeDrain Components
MaterialHAWA
BrandBanjo
Model75A1/2

Questions about this item

How much pressure can the 3/4" adapter handle during continuous operation?

The coupling is rated for a maximum working pressure of 225 psi at 70 F, so sustained use should stay within that limit.

Does the polypropylene body and EPDM gasket run hot or leak under all-day pressure?

Polypropylene and EPDM remain stable at the rated 225 psi and 70 F, with no extra heat or noise generated by the fitting itself.

Which pipe thread must I already have to connect this 1/2"-14 FNPT end?

You need a matching 1/2"-14 NPT male thread on your pipe or hose to make the connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.