We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Polypropylene 90-degree female coupler with FNPT threads

Banjo

Banjo 150D90 1-1/2" Female Coupler x FNPT 90 Degree Trap

SKU CH-QGEJ-4K23R MPN 150D90

A 1-1/2 inch female cam-and-groove coupler with a 90-degree FNPT thread, polypropylene body and EPDM gasket rated to 300 psi at 70 F

  • TypeDrain Components
  • MaterialHAWA
  • 90-degree elbow routes hose around tight corners
  • Polypropylene body resists common chemicals and corrosion
  • 1-1/2 inch FNPT threads match standard pipe sizes
  • EPDM gasket seals reliably at 300 psi
  • Cam-and-groove socket allows quick tool-free connection

1-1/2" Female Coupler x FNPT 90 Degree Trap

The Banjo 150D90 is a polypropylene cam-and-groove Type D coupling sized at 1-1/2 in. It connects a female coupler to an FNPT thread for drain and trap installations. The socket inside diameter is 2 9/64 in and overall length is 4 27/32 in. A gasket of EPDM material seals the joint.

Pressure rating at 70 F

Maximum working pressure is 300 psi when the fluid temperature is 70 F. The polypropylene body resists many chemicals but will lose strength as temperature rises above the rated point. No locking arm is included so the connection relies on cam tension alone. Sustained loads near the limit should be avoided in hot environments.

NPT thread constraints

The 1-1/2 in -11-1/2 NPT thread sets the practical seal limit for this fitting. Thread engagement depth and taper angle govern leak resistance more than the cam groove does. Installers must apply appropriate sealant and torque to meet the 300 psi rating. The 90 degree bend adds flow restriction that cannot be removed.

Highlights

  • 90-degree elbow routes hose around tight corners
  • Polypropylene body resists common chemicals and corrosion
  • 1-1/2 inch FNPT threads match standard pipe sizes
  • EPDM gasket seals reliably at 300 psi
  • Cam-and-groove socket allows quick tool-free connection

Specifications

TypeDrain Components
MaterialHAWA
BrandBanjo
Model150D90

Questions about this item

Does the 300 psi rating at 70 F hold when the coupler runs continuously?

The maximum working pressure is 300 psi at 70 F; continuous operation at that pressure and temperature is within the specified limit.

Which pipe thread must my system already have to connect the 1-1/2 in FNPT end?

The connection requires a 1-1/2 in -11-1/2 NPT male thread on the mating pipe or fitting.

Will the EPDM gasket and polypropylene body resist the same chemicals as my existing PVC drain line?

EPDM gaskets and polypropylene bodies generally handle many water-based chemicals, but verify compatibility with the specific fluids in your PVC system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.