We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five round LED modules with 1.5m USB cable

BambooSegD MH001 LED Lamp Kit 5PCS 1.5m USB 3 Color 3000K 4000K 6000K

SKU CH-GH9B-X7DFQ MPN MH001

Five-piece LED lamp kit for 3D-printed lights with three colour temperatures, power-off memory and a 1.5 m USB cable

  • Size/Dimensions3.9 cm x 15.2 cm x 20.3 cm
  • Length3.9 L x 15.2 W x 20.3 H centimeters
  • Lamp ToneWhite/Yellow/Warm white Colors
  • Color TemperatureWhite/Yellow/Warm white Colors
  • Light ColorWhite/Yellow/Warm white Colors
  • Power-off memory chip retains your last brightness and colour setting after unplugging
  • 5 m USB cable gives flexible placement on shelves or high cabinets
  • Three colour temperatures — 3000 K warm, 4000 K yellow, 6000 K cool white — for different ambience
  • Dimmable brightness adjustment lets you match light level to each project
  • Official hardware for 999+ free MakerWorld lamp designs, ready to print and assemble

3D-Printer LED Kit for DIY Light Boxes

This five-piece LED lamp kit is designed for makers who build 3D-printed light boxes, lithophanes or moon lamps. It connects via a 1.5 m USB cable and draws 5 V power from any standard port. The kit is aimed at hobbyists and educators who want consistent, adjustable illumination for display projects.

Upgrade from Fixed-Colour Strips

The kit replaces single-colour LED strips that offer no temperature control or memory function. Three selectable colour temperatures — 3000 K warm, 4000 K neutral and 6000 K cool — let you match the mood of each print. A built-in memory chip restores the last brightness and colour setting after power loss, removing the need to reconfigure the lights every session.

Check USB Power and Mounting Space

Verify that your printer, power bank or wall adapter can supply a free USB-A port for the 1.5 m cable. Confirm the 3.9 cm by 15.2 cm by 20.3 cm control module fits inside or beside your printed enclosure. The kit includes no battery, so continuous USB power is required for operation.

Highlights

  • Power-off memory chip retains your last brightness and colour setting after unplugging
  • 5 m USB cable gives flexible placement on shelves or high cabinets
  • Three colour temperatures — 3000 K warm, 4000 K yellow, 6000 K cool white — for different ambience
  • Dimmable brightness adjustment lets you match light level to each project
  • Official hardware for 999+ free MakerWorld lamp designs, ready to print and assemble

Specifications

BrandBambooSegD
ModelBMH5110140A5
Size/Dimensions3.9 cm x 15.2 cm x 20.3 cm
Length3.9 L x 15.2 W x 20.3 H centimeters
Lamp ToneWhite/Yellow/Warm white Colors
Color TemperatureWhite/Yellow/Warm white Colors
Light ColorWhite/Yellow/Warm white Colors
Part NumberBMH5110140A5

Questions about this item

What are the dimensions of each lamp module in the MH001 kit?

Each module measures 3.9 cm by 15.2 cm by 20.3 cm, making it compact enough for most 3D printed lamp housings or light boxes.

How is the 1.5 m USB cable connected and where do users commonly go wrong?

Plug the USB-A end into any 5 V USB port and use the inline controller to set colour and brightness; the common mistake is forgetting that the power-off memory chip saves the last setting automatically, so there is no need to reconfigure after unplugging.

Which component will need replacement first if the kit is used continuously?

The LED chips are rated for long life, but the USB cable or inline controller will typically wear out before the emitters, so keep a spare 5 V USB cable on hand for quick swaps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.