Baldwin Filters
Baldwin Filters PT830610 Hydraulic Filter Element 9.8 Micron
Hydraulic cartridge filter element rated at 9.8 microns with attached end seals for Zinga applications
- TypeAutomotive Filters
- 8 micron rating captures fine contaminants for cleaner hydraulic fluid
- 9 1/4 inch cartridge height fits Zinga hydraulic applications
- Two attached end seals simplify installation and prevent bypass
- Cartridge design allows element-only replacement reducing waste
- Baldwin Filters brand trusted for reliable filtration performance
Hydraulic Filter Element 9.8 Micron
The Baldwin Filters PT830610 is a cartridge-style hydraulic element built for Zinga hydraulic applications. It carries a 9.8 micron rating to capture fine contaminants and protect system components. The element includes two attached end seals for a secure fit and has no thread size requirement.
Contaminant capture without flow restriction
The 9.8 micron media removes particles that accelerate wear in pumps and valves while maintaining normal hydraulic flow. No moving parts or external power are involved so the element adds no noise or heat to the system. Pressure drop stays low until the element reaches its dirt-holding limit.
Direct replacement for Zinga cartridge housings
This element fits existing Zinga filter housings that accept a 9-1/4 inch cartridge with a 3-15/16 inch outside diameter and 1-15/16 inch inside diameter. It is not suited for systems that require a different micron rating or a spin-on canister design. Builders needing a finer or coarser rating must select a different element.
Highlights
- 8 micron rating captures fine contaminants for cleaner hydraulic fluid
- 9 1/4 inch cartridge height fits Zinga hydraulic applications
- Two attached end seals simplify installation and prevent bypass
- Cartridge design allows element-only replacement reducing waste
- Baldwin Filters brand trusted for reliable filtration performance
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Type | Automotive Filters |
Questions about this item
How do I install the PT830610 cartridge and which step is commonly missed?
Slide the cartridge into the housing until the two attached end seals seat fully; the step often missed is confirming both seals are evenly compressed before tightening the cover.
What maintenance or replacement will the PT830610 need later?
Replace the cartridge when the pressure differential across the 9.8 micron media reaches the system's change-out threshold; the end seals are not sold separately.
What limit appears first on the PT830610 during sustained hydraulic flow?
The 9.8 micron media loads with contaminant until the pressure drop hits the system's bypass setting, which is the first performance limit encountered.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
