We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical hydraulic filter element 13 1/32 in long 4 3/8 in diameter

Baldwin Filters

Baldwin Filters PT766 Hydraulic Filter Element 9.8 Micron 13 1/32 in

SKU CH-5ZMQ-A7MP7

Hydraulic filter element rated at 9.8 microns, 13 1/32 in long with 4 3/8 in outside diameter

  • 8 micron rating traps fine hydraulic contaminants
  • 13 1/32 inch length fits standard filter housings
  • 4 3/8 inch outside diameter matches common specifications
  • Inside-out flow design ensures efficient fluid filtration
  • Grommet and gasket attached simplify installation process

Baldwin PT766 Hydraulic Element

The Baldwin PT766 is a hydraulic filter element designed for fluid power systems requiring 9.8 micron filtration. It serves maintenance teams and equipment operators who need a replacement element for compatible filter housings. The unit uses an inside-out flow pattern to capture contaminants effectively.

Verify Housing Dimensions First

Before ordering confirm that your filter housing accepts an element with an outside diameter of 4 3/8 in and an overall length of 13 1/32 in. The inside diameter measures 23/32 in so the mounting post must match this bore. Attached grommet and gasket seal the element in place so inspect the housing sealing surfaces for damage.

Steady Flow Contaminant Capture

Under continuous hydraulic flow the 9.8 micron media traps particles consistently without the pressure spikes seen during cold starts. The inside-out design distributes dirt loading across the full pleat surface extending service intervals. Attached gaskets maintain seal integrity through pressure cycles and temperature swings.

Highlights

  • 8 micron rating traps fine hydraulic contaminants
  • 13 1/32 inch length fits standard filter housings
  • 4 3/8 inch outside diameter matches common specifications
  • Inside-out flow design ensures efficient fluid filtration
  • Grommet and gasket attached simplify installation process

Specifications

BrandBALDWIN FILTERS

Questions about this item

Does the PT766 element ship with any gaskets or seals included?

The element has a grommet and a gasket already attached so no separate seals are required.

How do I know whether the 9.8 micron rating matches my hydraulic system spec?

Check the equipment manufacturer's required micron rating; this element filters at 9.8 microns and uses inside-out flow.

What clearance do I need inside the housing for the 13 1/32 in length?

The element is 13 1/32 in tall with a 4 3/8 in outside diameter and a 23/32 in inside diameter.

More in Lubricants, Coolants & Fluids

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.