Baldwin Filters
Baldwin Filters PT757-10 Hydraulic Filter Element 18-1/2" L
Cartridge-style hydraulic filter element rated at 9.8 microns with 18-1/2 inch height and attached grommets for Schroeder systems
- TypeAutomotive Filters
- 8 micron rating captures fine contaminants for cleaner hydraulic fluid
- 18-1/2 inch height fits Schroeder systems without modification
- Cartridge design with attached grommets seals reliably under pressure
- 3-15/16 inch outside diameter matches OEM dimensions for direct replacement
- Baldwin Filters brand delivers consistent filtration performance in hydraulic applications
Hydraulic Filter Element
The Baldwin Filters PT757-10 is a cartridge-style hydraulic filter element designed for Schroeder hydraulic systems. It carries a 9.8 micron rating to capture contaminants and protect system components. The element measures 18-1/2 inches in length with a 3 15/16 inch outside diameter and a 1 19/32 inch inside diameter. It includes two attached grommets for installation.
Thermals and Power Draw
As a passive filtration component, this filter element generates no heat and draws no electrical power during operation. It creates no audible noise because it contains no moving parts or active cooling mechanisms. Pressure drop across the media varies with fluid viscosity and flow rate, which are determined by the host system. The cartridge simply removes particles as hydraulic fluid passes through it.
Bundled Grommets
Two grommets come attached to the element, eliminating the need to source separate seals for the mounting interface. This reduces assembly time and helps prevent leaks caused by missing or damaged seals. No software, monitoring tools or additional hardware are included with the filter. The accessory set is limited to the grommets shown in the specifications.
Highlights
- 8 micron rating captures fine contaminants for cleaner hydraulic fluid
- 18-1/2 inch height fits Schroeder systems without modification
- Cartridge design with attached grommets seals reliably under pressure
- 3-15/16 inch outside diameter matches OEM dimensions for direct replacement
- Baldwin Filters brand delivers consistent filtration performance in hydraulic applications
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Type | Automotive Filters |
Questions about this item
How do I install the PT757-10 cartridge and what step is often missed?
Slide the cartridge onto the housing post until the two attached grommets seat fully in the grooves; the step often missed is verifying both grommets are seated before tightening the housing.
What maintenance or replacement will the PT757-10 need later?
Replace the element when the system differential gauge reaches the service limit; the 9.8 micron rating means it captures fine particles, so change intervals depend on fluid cleanliness and operating hours.
What limit appears first on the PT757-10 during sustained hydraulic flow?
The 9.8 micron media loads with contaminant, causing pressure drop across the element to rise until the bypass valve opens or the service indicator triggers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
