Baldwin Filters
Baldwin Filters PT208 Hydraulic Filter Element 4-3/16" L
Hydraulic cartridge filter element rated at 20 microns with a 4-3/16 inch height for Clark lift trucks
- TypeAutomotive Filters
- 20-micron rating traps fine hydraulic contaminants
- 4-3/16 inch length fits Clark lift truck reservoirs
- Cartridge design with attached end seals simplifies installation
- 6-inch outside diameter matches OEM specifications
- New Baldwin Filters element ensures reliable hydraulic performance
Hydraulic Filter Element for Clark Lift Trucks
This Baldwin Filters PT208 cartridge is a hydraulic reservoir element built for Clark lift trucks. It carries a 20 micron rating and includes two attached end seals. The element measures 4-3/16 inches in height and length with a 6 inch outside diameter and a 3-1/2 inch inside diameter. It suits maintenance teams servicing compatible hydraulic systems.
Verify Model Fit and Thread Requirement
Confirm the filter matches the exact Clark lift truck specification before ordering. The supplier notes the thread size is not applicable for this element. Ensure the housing accepts a cartridge with a 6 inch outside diameter and a 3-1/2 inch inside diameter. Check that the 20 micron rating meets the system filtration requirement.
Cartridge Design With Attached Seals
The cartridge construction integrates two end seals to simplify installation and help prevent bypass. With no thread interface, the element seats directly in the reservoir housing. Normal operation sees fluid pass through the 20 micron media. Power draw and noise are governed by the host hydraulic pump rather than the filter itself.
Highlights
- 20-micron rating traps fine hydraulic contaminants
- 4-3/16 inch length fits Clark lift truck reservoirs
- Cartridge design with attached end seals simplifies installation
- 6-inch outside diameter matches OEM specifications
- New Baldwin Filters element ensures reliable hydraulic performance
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Type | Automotive Filters |
Questions about this item
What comes with the PT208 filter element and what must be purchased separately?
The PT208 includes two attached end seals. No separate seals or gaskets are required for installation.
How do I choose the correct PT208 version for my Clark lift truck?
The PT208 is a single cartridge with a 20 micron rating and 4-3/16 inch height. Verify your equipment manual matches these specifications.
What does the 20 micron rating mean for hydraulic system protection?
A 20 micron rating captures particles 20 microns and larger, protecting hydraulic components from contaminant wear during operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
