Baldwin Filters
Baldwin Filters PT191-10 Hydraulic Filter Element 8 in
Hydraulic filter element with 9.8 micron rating, 8 inch height and 6 inch diameter includes multiple gaskets for Clark, Euclid, Gradall and Sullair equipment
- TypeAutomotive Filters
- 8 micron rating captures fine particles
- 8 inch height fits Clark, Euclid, Gradall and Sullair equipment
- Cartridge design includes G253-A, G314, G359, ES1041 O gaskets
- 6 inch outside diameter matches specified hydraulic housings
- 3 17/32 inch inside diameter ensures proper seal
Baldwin PT191-10 Hydraulic Filter Element
The Baldwin Filters PT191-10 is a new hydraulic cartridge element measuring 8 in height and length with a 6 in outside diameter. It carries a 9.8 micron rating and a 3 17/32 in inside diameter for use with Clark, Euclid, Gradall and Sullair equipment.
Included G253-A G314 G359 ES1041 O-ring gaskets
The package supplies G253-A, G314, G359 and ES1041 gaskets so the seal is ready at installation. No separate seal kit is required and the thread size is listed as not applicable for this cartridge design.
Verify 9.8 micron rating
Confirm your system specifies a 9.8 micron rating and accepts an 8 in long by 6 in diameter cartridge with a 3 17/32 in bore. Ensure the Clark, Euclid, Gradall or Sullair model matches the application list before ordering.
Highlights
- 8 micron rating captures fine particles
- 8 inch height fits Clark, Euclid, Gradall and Sullair equipment
- Cartridge design includes G253-A, G314, G359, ES1041 O gaskets
- 6 inch outside diameter matches specified hydraulic housings
- 3 17/32 inch inside diameter ensures proper seal
Specifications
| Brand | BALDWIN FILTERS |
|---|---|
| Type | Automotive Filters |
Questions about this item
How often should the PT191-10 hydraulic filter element be replaced?
Replace the cartridge when the equipment manufacturer's service interval is reached or when the pressure differential indicator signals restriction. The 9.8 micron rating captures fine particles, so timely changes protect downstream components.
What pressure drop indicates the PT191-10 element is fully loaded?
The restriction gauge on the host machine shows the limit; when it reaches the OEM-specified differential pressure the 9.8 micron cartridge must be changed to avoid bypass and maintain flow.
How hot does the PT191-10 filter housing get during continuous hydraulic operation?
Housing temperature follows the hydraulic fluid temperature; the cartridge itself adds no heat, so expect the same temperature as the reservoir under all-day duty cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
